Harness jobs

Environmental Health & Safety Specialist Cypress, California, United States At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. The Role We are seeking an experienced, EHS Specialist to lead the stand-up and ongoing operation of our new ~80,000 sq. ft. flagship manufacturing facility in Cypress, CA. This site will become the primary production hub for the company. This role is responsible for owning all aspects of Environmental Health & Safety (EHS). Reporting to the Head of Production, you will serve as the single-threaded owner for safety programs, conduct safety trainings, investigate accidents and hazards and recommend corrective actions to eliminate or reduce potential risks. You will also provide liaison support to our Redondo Beach site as needed. This role requires a highly independent operator who can build, scale, and maintain systems in a fast-paced, high-growth manufacturing environment. What You'll Do - Develop and maintain sitewide EHS programs, procedures, and policies aligned with OSHA, Cal/OSHA, and Senra Systems standards - Conduct routine facility inspections, equipment checks, and compliance audits to ensure a safe and efficient manufacturing environment - Lead investigations for incidents and near misses; perform root cause analysis and drive corrective actions that address system level contributors - Deliver safety training, onboarding sessions, and ongoing awareness

Production Engineer Cypress, California, United States At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. We're building a dedicated Production Engineering function at Senra Systems - a team that owns the floor, not the desk. As a Production Engineer, you will be embedded in manufacturing as the technical resource our assembly technicians rely on during active production. While Manufacturing Engineers own the front-end documentation - BOMs, Engineering Masters, work instructions, and formboards - you own execution. You'll troubleshoot builds in real time, support first articles, verify cable and component kits, disposition non-conformances, and serve as the day-to-day engineering presence that keeps production moving. This role reports to the Lead Production Engineer and works closely with the Manufacturing Engineering, Production and Quality teams. What you'll own: Floor Troubleshooting & Real-Time Support - Serve as the on-floor technical resource during active production - resolving assembly issues, documentation discrepancies, and build questions without halting throughput - Identify and escalate systemic issues to the Lead PE or ME team with clear, structured documentation - Participate in root cause analysis and corrective action implementation for recurring production issues NCR Disposition - Review and disposition non-conformances generated on the floor with documented rationale (use-as-is, rework, or scrap) - Maintain NCR aging within

Engineer IV General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We have an exciting opportunity for an Integrated Hardware Design Supervisor within the ASI Division located in Poway, CA. This position will support routed cable harness design, manufacturing support, cable integration, and work among peers in a team environment. DUTIES & RESPONSIBILITIES: - Supervise and direct the work of the EE Integrated Hardware Design Engineers and Designers and oversee their output for throughput and quality. - Plan and schedule work assignments for the team. Monitor project schedules, timelines and deliverables using standard project management tools and related engineering systems. - Provide leadership and act as an advisor for determining engineering objectives, guide project planning, oversee design reviews, technical assessments, and design control documentation. - Responsible for the design and integration of routed cables for aircraft, GCS, GSE, and payloads used in unmanned air vehicle systems. - Provides supervision and direction to design or technical staff. - Designing of cables and wire harnesses that interconnect electronic equipment within the vehicle. - Responsible for generating 3D models of routed cables, cable assembly drawings, cable lengths, routing details, and cable BOMs. - Responsible for oversight of cable integrations to ensure cables are routed as designed. - Applies basic technical knowledge to analyze, investigate and resolve assigned routine engineering problems. - Develops appropriate documentation of findings and implemented solutions and

Flexible Aushilfe Schönenwerd Tommy Hilfiger Outlet (m/w/d) Tommy Hilfiger Outlet Schoenenwerd posted: Posted 22 Days Ago

Assembler WMS 3W Fort Worth, TX, United States Company Description: Job Description: Assemblers will perform multiple tasks while manufacturing locomotive/mining components, to include the installation of wiring harnesses and associated components, installation and/or connection of piping, limited tack welding, paint and associated application processes and material movement. Assemblers will use a variety of hand, electric, and pneumatic tools. Assemblers are responsible for working together to improve manufacturing processes and promote a climate of cooperation. Assembly may include but is not limited to the following: The sub-assembly of components and full assembly of finished The installation and/or connection of wiring harnesses and associated Electronic components The installation and/or connection of piping and associated plumbing components The set up and completion, of various simple welding operations Testing of assembly components for oil and/or air leaks, simple electrical malfunctions and various other simple testing. Repairs to be made when failures are detected The use of standard machine tools including, but not limited to drill press, band saw, lathe, press breaks, laser, pipe bender, spot welder etc., and a variety of hand, electric, and pneumatic tools will be required Paint applications will include, but not limited to dry sanding, masking, unmasking, finish paint, stencil, seal and touch up Material transport may include the use of but not limited to radio-controlled cranes, forklifts and tuggers Prying and setting heavy equipment Work with all facility employees on improving manufacturing processes through prototyping, fabrication and experimental machining to develop and prove concepts and design and implement necessary

Parts Puller - Automotive 1858 Pocatello, ID - Bailey posted: Posted 22 Days Ago

KERING EYEWEAR HR Business Partner Munich, Bavaria, Germany

Avionics Technician Huntington Beach, CA, Huntington Beach, California, United States About Mach Industries Founded in 2022, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms . At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 220 employees , we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role We are seeking an Avionics Technician to support avionics manufacturing and integration in our Huntington Beach facility. You will build wire harnesses, assemble and test avionics subassemblies, and support integration into our final UAS products. This role requires strong electrical workmanship, attention to detail, and comfort working in a fast-paced, documentation-controlled environment. Key Responsibilities - Fabricate wire harnesses (cut/strip, crimp, terminate, label, lace/overbraid as required) to workmanship standards - Solder and rework electronic assemblies as needed, including PCBAs and connector terminations - Modify and integrate COTS components per engineering instructions - Read and execute work from controlled documentation (work instructions, drawings, schematics) with revision discipline - Record build steps, inspection results, and traceability in the manufacturing execution system (MES) - Flash/load and verify correct software/firmware configurations; document results - Assemble, troubleshoot,

Assembler V General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. Under minimal supervision, this position is responsible for performing a variety of non-routine and non-repetitive assembly operations on electronic and /or mechanical assemblies and subassemblies. Determines and/or follows methods and sequence of operations in performing assembly tasks such as wiring, component installation, hand soldering and cable harnessing on assembly units. Makes continuity checks on work in process and completed work. May monitor and verify quality in accordance with control procedures. DUTIES & RESPONSIBILITIES: - Assembles components, assemblies or sub-assemblies. - Makes setups and adjustments holding tolerances to specifications. - May perform duties as required in assembly of electronic equipment such as cables, harnesses, chassis, and printed circuit boards; or may perform mechanical assembly of panels, LRU's, batteries, and servo motors as it pertains to cable assembly. - May disassemble, modify, rework, reassemble and test experimental/prototype assemblies or subassemblies according to specifications. - Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. - Expected to work in a safe manner in accordance with established operating procedures and practices. - Completes Disposition on Nonconforming product when needed. - Participates in production Integrated Process Team (IPT) - Communicates/works with engineering and other support departments. - Participates/runs weekly cell team meeting. - Mentors team members in assigned cell.

Live Haul CDL Driver - Home Daily Live Haul CDL Driver - Home Daily

Footwear Associate Store1538 Erie PA posted: Posted 30+ Days Ago

Integration Engineer - Avionics Los Angeles, CA Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. We are seeking an Avionics Integration Engineer to support vehicle avionics hardware from design release through assembly, test, and final delivery. In this role, you will be a critical part of a cross-disciplinary team supporting aggressive development timelines for every electrical system on-vehicle. This position influences design and system architecture trades based on manufacturability and performance during test. You will also support standing up our internal AVI shop as we develop and qualify processes to produce harnesses, build boxes, and perform checkouts. We are seeking an Avionics Integration Engineer to support vehicle avionics hardware from design release through assembly, test, and final delivery. In this role, you will be a critical part of a cross-disciplinary team supporting aggressive development timelines for every electrical system on-vehicle. This position influences design and system architecture trades based on manufacturability and performance during test. You will also support standing up our internal AVI shop as we develop and qualify processes to produce harnesses, build boxes, and perform checkouts. Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping

Flexible Aushilfe Wolfsburg Calvin Klein Outlet (m/w/d) Calvin Klein Wolsburg (Outlet) posted: Posted 30+ Days Ago

Avionics Integration & Test Technician (Starship) - Night Shift Starbase, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. AVIONICS INTEGRATION & TEST TECHNICIAN (STARSHIP) - NIGHT SHIFT RESPONSIBILITIES - Read, interpret, and work from released schematics and drawings as well as from uncontrolled documentation. Interpret design intent and provide feedback to engineering to complete documentation - Perform validation and testing of various electronic components using equipment such as multi-meters, oscilloscopes, network analyzers, and test racks - Perform integration on a full system suite of electronics to include on-vehicle, ground segment, and ground support applications - Document results in a clear, precise, and complete manner - Assemble and repair high quality wire harnesses, test racks, junction boxes, and associated components - Support the development of avionics hardware and procedural improvements via design, test, fabrication, and work instruction efforts. Self-monitor progress and achieve on time delivery of all work BASIC QUALIFICATIONS: - High school diploma or equivalency certificate - 1+ years of experience manufacturing wire harnesses or electro-mechanical sub-assemblies - 1+ years of experience using electronics equipment (e.g. DMMs, oscilloscopes, network analyzers, power supplies, DAQs, etc.) PREFERRED SKILLS AND EXPERIENCE - Experience in aerospace, aviation, military, or other high-reliability industry - Skill in operating and manipulating machinery and various hand and power

Production Supervisor Cypress, California, United States At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. We're hiring a Production Supervisor to lead day-to-day operations on the shop floor, ensuring safe, high-quality, and on-time production while building a high-performance, accountable technician team. This role is critical to scaling our manufacturing operations and bridging execution between production, engineering, and quality. You'll be hands-on in the factory, driving output, resolving issues in real time, and setting the standard for performance, professionalism, and culture on the floor. What you'll own: Production Execution & Floor Leadership - Maintain a consistent presence on the shop floor to support technicians, unblock issues, and ensure production is tracking to plan - Lead daily shift standups and participate in production and leadership meetings to align on priorities, risks, and output targets - Set and communicate daily and weekly production goals in partnership with scheduling and production planning - Ensure all work is completed on time and to specification - Drive production flow, balancing throughput, quality, and efficiency across your area - Partner cross-functionally with Manufacturing Engineering and Quality to resolve issues and minimize production interruptions Team Leadership & Performance Management - Lead, coach, and develop a team of technicians with clear expectations around performance, quality,

Sales Associate- UGG UGG Cincinnati Premium Outlet (Monroe, OH) posted: Posted 30+ Days Ago

Facilities & Maintenance Manager Cypress, California, United States; Redondo Beach, California, United States At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. The Role We are seeking an experienced, hands-on Facilities & Maintenance Manager to lead the stand-up and ongoing operation of our new ~80,000 sq. ft. flagship manufacturing facility in Cypress, CA. This site will become the primary production hub for the company. This role is responsible for owning all aspects of facilities, and equipment maintenance across the site. You will play a critical role in bringing the factory online, partnering with construction teams, managing contractors, and building the systems and processes required to support a high-performing manufacturing environment. Reporting to the Head of Production, you will serve as the single-threaded owner for facility operations, infrastructure reliability, and site readiness. You will also provide liaison support to our Redondo Beach site as needed. This role requires a highly independent operator who can build, scale, and maintain systems in a fast-paced, high-growth manufacturing environment. What You'll Do Facility Build-Out & Contractor Management - Support the bring-up of the Cypress facility, partnering with internal stakeholders and external contractors to ensure on-time, on-budget execution - Manage construction projects, vendors, and contractors with a focus on minimal disruption to

Supervisor, Category Merchandising Work City Values & Innovation At Under Armour, we are committed to empowering those who strive for more, and the company's values - Act Sustainably, Celebrate the Wins, Fight on Together, Love Athletes and Stand for Equality - serve as both a roadmap for our teams and the qualities expected of every teammate. Our Values define and unite us, the beliefs that are the red thread that connects everyone at Under Armour. Our values are rallying cries, reminding us why we're here, and fueling everything we do. Our pursuit of better begins with innovation and with our team's mission of being the best. With us, you get the freedom to go further - no matter your role. That means developing, delivering, and selling the state-of-the-art products and digital tools that make top performers even better. If you are a current Under Armour teammate, apply to this position on the Internal Career Site Here. Your Impact ESSENTIAL DUTIES & RESPONSIBILITIES Support the development and execution category product strategy, including launch cadence, pricing, product assortment, zoning placement plan, SKU level forecasting Conduct Commercial Input containing regular market and trend research to inform Global product development decisions Seasonal sales meeting preparation including category presentations, merchandising guidance, sample management, catalogue, and order form Communicate the product plan effectively with other team members including planning, VM, MKT, channel team, etc. Analyze sales data, conduct

Safety Trainer Moreno Valley, California posted: Posted 30+ Days Ago

Robot Build Technician Fremont, California, United States We're looking for a hands-on Build Technician who thrives in a fast-paced hardware environment. You'll be responsible for building, assembling, and maintaining the robotic systems that power our data collection and model training operations. You'll work directly with our Hardware Engineering team to bring robots from prototype to production, ensuring quality and reliability at every step. What You'll Do : - Build and assemble robotic systems according to engineering specifications, including mechanical, electrical, and electromechanical components - Install, calibrate, and configure robots and end-of-arm tooling for various applications - Execute test protocols and quality checks to ensure robots function as designed - Maintain detailed service records and documentation for robotic equipment - Support hardware bring-up, including wiring, harnessing, and integration of sensors and actuators - Collaborate with mechanical, electrical, and software engineers to root-cause manufacturing issues and implement solutions - Manage inventory of parts, tools, and consumables for the hardware lab - Train team members on assembly procedures and best practices Competencies and Skills : - 2+ years of experience in mechanical or electromechanical assembly, robotics, or manufacturing environments - Proficiency with hand tools, power tools, and lab equipment (soldering, crimping, torque wrenches) - Experience with cable harnessing, wire routing, and electrical integration - Ability to read and interpret mechanical drawings, schematics, and assembly instructions - Familiarity with robotic systems, PLCs, or automated equipment is a plus - Basic understanding of CAN bus, Ethernet, and communication protocols - Strong troubleshooting skills and attention

SOX Senior Analyst/Analyst 2 Locations posted: Posted 24 Days Ago

Electronics Fabrication Technician Specialist Livermore, CA, United States Company Description: Join us and make YOUR mark on the World! Lawrence Livermore National Laboratory (LLNL) has turned bold ideas into world-changing impact advancing science and technology to strengthen U.S. security and promote global stability. Our mission spans four critical national security areas nuclear deterrence, threat preparedness, energy security, and multi-domain defense empowering teams to take on the toughest challenges of today and tomorrow. With a culture built on innovation and operational excellence, LLNL is a place where your expertise can make a real impact. Job Description: We have multiple openings for Electronics Fabrication Technicians . In this role, you will work with scientists and engineers to support manufacturing efforts including electrical/electronic fabrication and packaging; assembly and modification of printed circuit boards, cables and wire harnesses; assembly and disassembly of electronic devices, chassis and systems as well as other specialized equipment used to support ongoing research and projects at Lawrence Livermore National Laboratory. This position is in the National Security Engineering Division (NSED) within the engineering directorate. This position will be filled at either level based on knowledge and related experience as assessed by the hiring team. Additional job responsibilities (outlined below) will be assigned if hired at the higher level. This position requires full-time on-site presence due to the nature of the work. In this role, you will Provide general fabrication support to assist in the planning, organizing, and completion of moderately complex manufacturing projects. Fabricate cables and wire harnesses using

Security Guard- night shift Security Guard- night shift

Software Engineer, Agent Evaluation and Quality San Francisco, CA, United States, New York Our mission is to automate coding. The first step in our journey is to build the best tool for professional programmers, using a combination of inventive research, design, and engineering. Our organization is very flat, and our team is small and talent dense. We particularly like people who are truth-seeking, passionate, and creative. We enjoy spirited debate, crazy ideas, and shipping code. About the Role As a Software Engineer on the Agent Quality team at Cursor, you'll build the measurement, evaluation, and feedback-loop infrastructure that makes the Cursor core agent reliably better over time. This role sits at the intersection of product, data, and engineering: you'll instrument what matters, help define how we judge quality, build pipelines and tooling to analyze agent behavior at scale, and partner closely with research, product, and infrastructure teams to turn insights into improvements. Your impact will compound across every Cursor product built on the shared harness-and across high-stakes decisions around model choice, quality, and cost. What you'll work on - Designing and building best-in-class AI evaluation system: curated datasets, offline replay, scorers / judges, regression alerts, and dashboards. - Designing feedback loops from real usage: collecting, cleaning, and interpreting user signals to inform model and harness changes. - Developing analysis tooling and workflows for debugging agent behavior: deep dives on failure modes, clustering themes, and surfacing actionable insights. - Improving reliability and guardrails by making quality measurable and operational: defining “good/bad/degraded”