Spacex jobs

Sr. RF Software Engineer (Starshield) Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. SR. RF SOFTWARE ENGINEER (STARSHIELD) Starshield leverages SpaceX's Starlink technology and launch capability to support national security efforts. While Starlink is designed for consumer and commercial use, Starshield is designed for government use, with an initial focus on earth observation, communications, and hosted payloads. As a RF software engineer on the Starshield team, you will be working on advanced development programs in support of US National Security. You will work with a team of RF engineers, DSP engineers, software engineers, hardware engineers and end users to design and build RF capabilities for proliferated communications and remote sensing in low earth orbit. You will work in a highly collaborative and fast-paced environment, where we are exploring unsolved problems and applying the SpaceX mindset of iterating rapidly to go from design and demo to operational capability at lightning pace. RESPONSIBILITIES: - Drive program-level decisions on RF system designs - Research novel solutions for unique large-scale satellite RF systems - Design, build, validate, and automate RF test benches for full characterization of custom RF designs, often involving vector network analyzers (VNA), vector signal generators (VSG), vector signal analyzers (VSA), spectrum analyzers, load pulls, RF power meters, high-speed oscilloscopes, and

Receiving Inspector (Starlink) - Night Shift Bastrop, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. RECEIVING INSPECTOR (STARLINK) - NIGHT SHIFT SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world's largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink's potential for communities and businesses around the globe. RESPONSIBILITIES: - Perform documentation review and verification of certifications, specifications, and conformance to design requirements through eCerts or physical copies - Complete receiving transactions of incoming product per established procedures - Approve or reject items and documents based on inspection results as required - Communicate with internal customers and suppliers to resolve inspection discrepancies, documentation issues, and packaging damage - Use electronic MRP system to document issues and route parts and components to proper departments - Resolve nonconformance and documentation issues, support quality management

Facilities Technician, Solar Cells (Starlink) - Day Shift Bastrop, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. FACILITIES TECHNICIAN, SOLAR CELLS (STARLINK) - DAY SHIFT At SpaceX, we are building the next generation of space infrastructure to enable large-scale AI data centers in orbit. These orbital AI platforms require massive amounts of reliable, high-efficiency solar power to support intensive computing workloads in space. To make this possible, we are standing up one of the largest solar cell manufacturing facilities in the world. We are seeking a Facilities Technician to perform preventive and corrective maintenance on building infrastructure and utility systems that keep the solar cell production environment stable. RESPONSIBILITIES: - Perform preventive and corrective maintenance on building infrastructure and utility systems to keep the solar cell production environment stable and reliable - Maintain and repair HVAC support equipment, chilled water systems, pumps, cooling towers, valves, filters, piping, and associated mechanical systems - Perform ductwork modifications, brazing, soldering, evacuation and charging of refrigerants, water piping, and insulation repairs - Assemble, install, repair, and maintain pipes, fittings, and mechanical systems according to specifications and codes - Conduct hands-on disassembly, inspection, troubleshooting, reassembly, and testing of mechanical equipment - Perform failure assessments, safety inspections, and recommend improvements to the supervisor - Adjust and

Maintenance Technician Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MAINTENANCE TECHNICIAN Self-sufficient, independent, all-round technician performing preventive and emergent maintenance and troubleshooting on various equipment used by the Flight Hardware Logistics team, who is responsible for the transportation of Falcon engines, stages, and components. We are looking for a systematic problem solver who understands a high-volume manufacturing environment and keeps the equipment running in optimal condition. RESPONSIBILITIES: - Troubleshoot and repair the following: air ride suspension and brake systems, lighting, wiring, gas-powered pony motors and generators, and fluid hydraulic systems on shipping fixtures - Engage in preventive maintenance of various mechanical, control, hydraulic, fluid, and electrical systems - Troubleshoot various mechanical, control, hydraulic, fluid, and electrical systems down to the component level - Adhere to the California Highway Patrol (CHP) Biennial Inspection of Terminals (BIT) and Department of Transportation (DOT) regulations - Perform CHP and DOT-required 90-day inspections, as well as annual inspections - Document all work and repairs by creating and updating maintenance tickets and work orders BASIC QUALIFICATIONS: - High school diploma or equivalency certificate - 2+ years of professional experience in maintaining, troubleshooting, and repairing electrical, mechanical, fluid, and/or control systems PREFERRED SKILLS AND EXPERIENCE: - Experience leading a team or managing a maintenance program,

Principal Electrical Design Engineer, Gateways & Customer Hardware (Starlink) Bastrop, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. PRINCIPAL ELECTRICAL DESIGN ENGINEER, GATEWAYS & CUSTOMER HARDWARE (STARLINK) Starlink believes in providing fast, reliable internet to serve populations with little or no connectivity. We design, build, launch, and operate the world's largest constellation of satellites, enabling us to operate a global internet network unbounded by traditional ground infrastructure limitations. Starlink also designs, builds, and delivers high-volume consumer hardware that allows users to connect to these satellites within minutes of unboxing, as well as our advanced gateways that we deploy regionally throughout the world. The root of SpaceX's success so far lies in our mission to keep all engineering and production in-house, which enables a tight feedback loop, nimble decision-making, and speedy deliverables. With millions of daily users worldwide already online, Starlink is truly a game-changer and levels the playing field for those who were previously unconnected. As a Principal Electrical Design Engineer on the Starlink team, you will have complete ownership over the development of millions of customer-facing products and devices that we ship directly to end users (Starlink dishes/user terminals, Wi-Fi routers, etc.). Our customers currently include teachers in the most remote parts of the Amazon, researchers in Antarctica, digital

Mechanical Engineer, Flight Termination System (Starship) Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MECHANICAL ENGINEER, FLIGHT TERMINATION SYSTEM (STARSHIP) As a member of the Flight Termination System team, you will have the exciting opportunity to be responsible for the design of the Starship Flight Termination System hardware and explosives! You will demonstrate extreme ownership through deep understanding of the functionality, design, and requirements from concept to delivery of hardware. You will have ownership over the entire development process of Flight Termination System hardware including hardware design, analysis, production facility layout, electromechanical assembly, live ordnance assembly, environmental testing, and vehicle integration. As an extreme owner you will be responsible for interfacing with regulatory partners to implement, tailor, and challenge space industry regulatory requirements to achieve the best outcomes. Our development timelines are aggressive and the Flight Termination System is one of the few safety critical systems on the vehicle. The hardware that makes up the FTS requires extremely high levels of rigor and you will solve very challenging problems at the intersection of safety critical hardware and high explosives. RESPONSIBILITIES: - Develop state-of-the-art, manufacturable explosive devices and robust hardware integration designs (system controllers, electronic safe and arm devices, destruct charges, and integrated detonators) for the Starship and Super Heavy

HVAC Technician, Solar Cells (Starlink) - Day Shift Bastrop, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. HVAC TECHNICIAN, SOLAR CELLS (STARLINK) - DAY SHIFT At SpaceX, we are building the next generation of space infrastructure to enable large-scale AI data centers in orbit. These orbital AI platforms require massive amounts of reliable, high-efficiency solar power to support intensive computing workloads in space. To make this possible, we are standing up one of the largest solar cell manufacturing facilities in the world. We are seeking an HVAC Technician to maintain and troubleshoot the cleanroom HVAC and environmental control systems critical for particle control and temperature/humidity stability in solar cell processing. RESPONSIBILITIES: - Maintain and repair HVAC support equipment and cleanroom environmental control systems including air handlers, chilled water systems, condenser pumps, cooling towers, valves, and filters - Maintain preventative maintenance schedules on building HVAC systems critical for particle control, temperature, and humidity stability in solar cell processing areas - Collaborate with engineering teams to keep systems in peak operating condition - Perform ductwork modifications, brazing, soldering, evacuation and charging of refrigerants, water piping, and insulation repairs - Follow all regulations and procedures including OSHA, EPA, NFPA, and other applicable standards - Troubleshoot HVAC and environmental control systems supporting ISO-classified cleanrooms.

Sr. RF Engineer (Starshield) Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. SR. RF ENGINEER (STARSHIELD) Starshield leverages SpaceX's Starlink technology and launch capability to support national security efforts. While Starlink is designed for consumer and commercial use, Starshield is designed for government use, with an initial focus on earth observation, communications, and hosted payloads. As an RF engineer on the Starshield team, you will be working on advanced development programs in support of US National Security. You will work with a team of fellow RF engineers, DSP engineers, software engineers, hardware engineers and end users to design and build RF capabilities for proliferated communications and remote sensing in low earth orbit. You will work in a highly collaborative and fast-paced environment, where we are exploring unsolved problems and applying the SpaceX mindset of iterating rapidly to go from design and demo to operational capability at lightning pace. RESPONSIBILITIES: - Drive program-level decisions on RF system designs - Research novel solutions for unique large-scale satellite RF systems - Work in close collaboration with hardware, FPGA, DSP, and software engineers to design and validate RF systems - Responsible for development and full life cycle support of RF hardware spanning PCBA board testing and defect detection, full functional testing of an

Cleanroom Technician - Microelectronics (Starlink) Redmond, WA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. CLEANROOM TECHNICIAN - MICROELECTRONICS (STARLINK) SpaceX is developing a new generation of low-latency, broadband internet system called Starlink, which is the world's largest constellation of highly advanced satellites operating in a low orbit around the Earth. As a Microelectronics Technician, you will be joining a small team that supports the production of high-speed RF and optical modules that are instrumental in achieving high-speed internet for the world's most advanced internet system. RESPONSIBILITIES : - Operate, maintain, and calibrate microelectronics equipment (die bonders, wire bonders, AOI machines, and more) in an ESD-controlled cleanroom environment, emphasizing detail, accuracy, precision, and efficiency. - Manufacture high-mix, medium-volume, high-frequency RF products using high-precision tools/processes, semiconductor dies, and automated ball bonding techniques to achieve aggressive production targets. - Verify processes using metrology tools (e.g., CSAM, X-ray, 3D profilometers, pull/shear testers, contact angle goniometers) to assess epoxy voids, wirebond loop heights, and pull/shear forces. - Work independently in a fast-paced startup environment while managing workflow, safety, organization, inventory, and 5S principles for a clean, sustainable workspace. - Communicate via MS Office Suite (Excel, Word, PowerPoint, Outlook) and ERP software to coordinate with engineers, specialists, and technicians. BASIC QUALIFCATIONS: - High school diploma or

Test Stand Maintenance Technician McGregor, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. TEST STAND MAINTENANCE TECHNICIAN Maintenance technicians at the Rocket Development and Test Facility work in a fast-paced testing environment, where the extraordinary becomes the everyday. This role helps with the build, activation, modification, and improvement of fluid and mechanical systems that test the most powerful high-volume rocket engines in the world. With a focus on repairs and reliability, maintenance technicians are expected to use every tool they have to keep the rocket development and production test stands working well. This work includes performing corrective, preventive, and predictive maintenance on test systems, troubleshooting mechanical and electrical hardware, and giving operations and design feedback to drive improvements across our entire test site. RESPONSIBILITIES: - Modify and maintain test stands and ground support equipment that support testing of fully integrated flight vehicles, individual rocket engines, and various rocket components - Troubleshoot, diagnose, and repair hardware associated with rocket test stand systems, typically part of fluid, structural, and mechanical subsystems - Maintain structural/mechanical systems and related components such as rollers, bearings, rams, and similar items - Maintain fluid systems and related components such as process piping, pumps, valves, filters, and similar items - Collaborate with design and operations engineers to maintain

Yield Engineer, RF Final Test Integration (Starlink/Akoustis) Bastrop, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. YIELD ENGINEER, RF FINAL TEST INTEGRATION (STARLINK/AKOUSTIS) Akoustis is now operating as a wholly owned subsidiary of SpaceX, providing industry leading RF filters using patented XBAW technology to help drive the mission of making human life multi-planetary and connecting the world through Starlink. We design, build, launch, and operate the world's largest constellation of satellites, enabling us to operate a global internet network unbounded by traditional ground infrastructure limitations. The root of SpaceX's success so far lies in our mission to keep all engineering and production in-house, which enables a tight feedback loop, nimble decision-making, and speedy deliverables. With millions of daily users worldwide already online, Starlink is truly a game-changer and levels the playing field for those who were previously unconnected. We are seeking a driven and detail-oriented Yield Engineer to join our RF device manufacturing team. This role focuses on correlating RF final test results with front-end wafer-level performance to identify and eliminate root causes of yield loss. You will be responsible for developing and implementing RF test solutions, managing test workflows, and driving process improvements across wafer probe and final test operations. The ideal candidate brings experience in RF test development,

International Infrastructure Operations Specialist (Starlink) Redmond, WA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. INTERNATIONAL INFRASTRUCTURE OPERATIONS SPECIALIST (STARLINK) SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. Starlink is revolutionizing global connectivity as the world's largest satellite-based ISP, powered by our vast satellite constellation and global ground infrastructure. The Infrastructure Operations team oversees suppliers, costs, and delivery of the ground network worldwide. We're seeking talented team members to grow and manage our global antenna ground stations (Gateways) and datacenter points of presence (PoPs). In this high-impact role, you'll cultivate strategic partnerships with key ground infrastructure suppliers-including datacenters, fiber companies/ISPs, internet exchanges (IXs), and other in-region partners-to identify, deliver, and operate Starlink's ground infrastructure. As our footprint expands, you'll tackle challenges in supplier management, cost optimization, speed to activation, service delivery, and reliability. We're looking for creative, fast problem-solvers who thrive on challenges outside their comfort zone. RESPONSIBILITIES: - Find and establish the regional and global supplier partnerships needed to acquire, build, expand, and successfully operate Starlink's ground infrastructure - Execute long-term

GNC Engineer (Starship) Starbase, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. GNC ENGINEER (STARSHIP) As a GNC Engineer, you will be responsible for pushing the technical boundaries of flight control systems for the world's most advanced rockets, including our next-generation Starship vehicle, a fully reusable spacecraft capable of carrying humans to the Moon, Mars and beyond. You will work with a talented team of accomplished engineers to develop, analyze, and test vehicles and subsystems for highly reliable flight. You should thrive in fast-paced, dynamic environments where you adapt quickly and love to solve hard problems. RESPONSIBILITIES: - Develop innovative guidance, navigation, and control systems for Starship - Engage in multi-disciplinary vehicle systems investigations and design work that define the systems architecture - Implement new software or algorithms to enable mission unique capabilities and leading edge launch vehicle performance - Develop 6-DOF dynamics simulation models used for GNC systems analysis and validation - Analyze launch vehicle trajectories, performance dispersions, and flight stability - Conduct post flight data review and correlation with analyses for continued improvement of predictions - Support launch and mission operations of vehicles that you enabled - Perform testing of GNC software utilizing hardware-in-the-loop testing, Monte Carlo analysis, and algorithm unit testing BASIC QUALIFICATIONS: - Bachelor's degree in

Integration & Test Engineer (Starlink Propulsion) Redmond, WA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. INTEGRATION & TEST ENGINEER (STARLINK PROPULSION) As an Integration & Test engineer for Starlink propulsion you will have the opportunity to develop, implement, and optimize production processes for key sub-assemblies and components of the propulsion system comprised of the Argon Hall Thruster, propellant feed systems, and satellite primary structure. Engineers on this team must have a working knowledge of design, schematics, operations, manufacturing, testing, and flight checkouts. A successful Integration and Test Engineer demonstrates engineering intuition and critical thinking and is comfortable working under ambiguous requirements with minimal oversight. Combining these skills, these engineers face challenges across a wide variety of work centers at the company, and the team is frequently asked to tackle new, inter-departmental development projects. The ultimate goal of the Integration and Test team is to ensure that satellites achieve their mission. RESPONSIBILITIES: - Manage integration build flow and test operations - Evaluate proposed designs for manufacturability and integration - Interface with both engineers and technicians to optimize manufacturing and automation - Regularly challenge each process, part, and operation while working closely with design/development engineers to create the most manufacturable and reliable satellite hardware possible - Maintain a sense of holistic ownership

Software Engineer, PCBA (Starlink) Redmond, WA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. SOFTWARE ENGINEER, PCBA (STARLINK) As a Software Engineer on the PCBA design and manufacturing team, you will be responsible for building and maintaining software that interfaces with manufacturing equipment on our production line, with the goal of making our PCBA manufacturing process faster and more reliable. This is a high-autonomy role that will require building close relationships with manufacturing staff to understand issues, and coming up with software solutions interfacing with APIs or hardware that may have little or no documentation or vendor support. We are looking for people who like to own a problem from start to finish in a high-responsibility and low-micromanagement environment! RESPONSIBILITIES: - Develop highly reliable software solutions that are used across SpaceX production and engineering - Create new applications that improve how SpaceX production operates - Build prototypes to prove out key design concepts and quantify technical constraints - Deep dive into users' problems to find and create efficient solutions - Integrate electronics design software to manufacturing equipment - Display ownership throughout and following the release process for applications BASIC QUALIFICATIONS: - Bachelor's degree in computer science, engineering, math, or STEM discipline - 1+ years of experience in full stack software development

Full Stack Software Engineer (Components) Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. FULL STACK SOFTWARE ENGINEER (COMPONENTS) The Components Engineering Team develops the world's best flight hardware and fabricates it at an in-house machine shop for Starship. The team is making a next generation machine shop with advanced software and automation, an alien dreadnought machine that builds the machine. As a software engineer, you will design novel software solutions such as web applications for efficient factory operation, algorithms and AI to automatically create CNC programs, control and deployment of CNC machines, and much more. These improvements will enable rapid Starship production rates of 100+ per year as well as a quick development cycle, which are critical for SpaceX's Moon and Mars missions. Previous manufacturing experience is not necessary, just the desire to make high-quality software to rapidly build Starships. RESPONSIBILITIES: - Develop highly reliable software solutions that are used across many SpaceX teams - Own all aspects of software development, including design, testing, and deployment - Rapidly create new applications that improve the production cycle time in the machine shop and the time to go from CAD to part in hand - Deep dive into your users' problems to find and create efficient solutions - Bring your voice

Process Engineer, Wafer-Level Packaging (Akoustis) Canandaigua, NY SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. PROCESS ENGINEER, WAFER-LEVEL PACKAGING (STARLINK/AKOUSTIS) Akoustis is now operating as a wholly owned subsidiary of SpaceX, providing industry leading RF filters using patented XBAW technology to help drive the mission of making human life multi-planetary and connecting the world through Starlink. We design, build, launch, and operate the world's largest constellation of satellites, enabling us to operate a global internet network unbounded by traditional ground infrastructure limitations. The root of SpaceX's success so far lies in our mission to keep all engineering and production in-house, which enables a tight feedback loop, nimble decision-making, and speedy deliverables. With millions of daily users worldwide already online, Starlink is truly a game-changer and levels the playing field for those who were previously unconnected. Akoustis supports the success of Starlink by supplying world-class RF filters manufactured with the highest levels of quality and reliability. At Akoustis, we continually strive for manufacturing excellence with a focus on cost controls and production throughput. We are seeking an experienced Wafer Level Packaging (WLP) Process Engineer to join our manufacturing team. RESPONSIBILITIES: - Assume primary ownership of processes and equipment associated with the Akoustis WLP (wafer-level packaging) production line - Develop and implement new

Material Flow Analyst Starbase, TX SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MATERIAL FLOW ANALYST Material Flow Analysts are focused on using data to support effective inventory management and efficient material flow at Starbase. They improve, maintain, and monitor the Materials Management toolset to assist operations with daily production support functions and continuous improvement. Material Flow Analysts possess strong analytical and problem-solving capabilities, as well as a solid understanding of material flow fundamentals including inventory control, storage strategies, part routing, packaging concepts, lineside replenishment and materials management systems. RESPONSIBILITIES: - Support inventory accuracy: Monitor inventory data daily via the cycle counting program to ensure a high level of accuracy and immediate reaction to process failures or incorrect behaviors - Drive continuous improvement: Use data to identify opportunities for process and systems improvement and lead efforts to implement changes that result in improved safety, inventory accuracy, delivery and/or productivity - Support production: Work closely with leaders, production coordinators and specialists to ensure that parts are flowing through the process and available on the lineside for production. Proactively identify and resolve part shortages or inventory discrepancies to prevent production delays - Report on metrics: Conduct frequent reviews of area metrics to support leadership in tracking performance and identify trends for improvement. Prepare

AI Software Engineer (Vehicle Engineering) Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. AI SOFTWARE ENGINEER (VEHICLE ENGINEERING) Be a member of the Artificial Intelligence Software Engineering team focusing on solving complex AI data problems for our launch vehicles and spacecrafts. Our team is creating AI systems to accelerate software development and test, avionics design, flight data review, logistics and mission operations. Your work will directly support the world's largest satellite communication and AI constellations, accelerate rapid reuse of the Falcon launch vehicle, and contribute to the development of the world's largest rocket capable of sending humans to Mars. The role will consist developing core AI technologies to accelerate engineering. You will be responsible for training internal engineering models on SpaceX data. This will consist of training models from scratch, fine tuning models, and using Reinforcement Learning (RL) to post train LLMs. You will also employ other Machine Learning (ML) techniques to intelligently extract knowledge hidden from SpaceX data. You will also be responsible for working with a diverse set of AI technologies including building Agentic engineering tools, including engineering RAG based tool, and engineering MCP servers. The AI tools and models will used to help engineers rapidly design and test space hardware including electronics and propulsion systems. The

Sr. Reliability Engineer (Starlink) Redmond, WA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. SR. RELIABILITY ENGINEER The Sr. Reliability Engineer plays a critical role in supporting the design engineer community towards higher reliability EEE components and systems. This person ensures SpaceX can continue to use commercial electronics from a wide range of manufacturers. The Sr. Reliability Engineer is a key member that is involved with evaluating the quality and reliability of components for the design community. This engineer will also address unforeseen component issues/failures and bring appropriate groups together to drive work towards closure. This work impacts all stages of design and production and must interface with supply chain, design engineers, manufacturing engineers, and production. RESPONSIBILITIES: - Provide support for team leadership and technical guidance within and without the Hardware and EEE Parts Reliability group - Drive Avionics EEE piece part reliability issues and risk towards closure - Use reliability physics of failure models and reliability statistics to assess risk levels to the mission as well as to develop and implement accelerated tests to mitigate risks and qualify designs - Lead reliability test planning, methodology and execution - Drive analysis processes for all failures discovered during reliability testing - Build reliability prediction models/Finite Element Models to evaluate product functional performance

Manufacturing Specialist - 2nd Shift Redmond, WA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. SMT SPECIALIST - 2ND SHIFT We are looking for talented, creative, and driven specialists to drive manufacturing tools and processes. Join the Starlink printed circuit board assembly (PCBA) team and take ownership of Surface Mount Technology (SMT) processes that enable the high-volume production of electronics designed for spaceflight. This is a hands-on engineering support role where you will develop, optimize, and scale SMT processes to meet aggressive rate and quality targets. You will bridge the gap between engineering and production - working closely with hardware engineers to improve manufacturability, rapidly troubleshoot issues, and drive continuous improvement in a fast-moving environment. If you thrive on solving complex manufacturing challenges and want to see your work launched into orbit, this role is for you. RESPONSIBILITIES: - Optimize PCBA manufacturing processes including paste print, pick-and-place, reflow, conformal coating, selective soldering, board wash, and inspection (X-ray, AOI, SPI, visual) - Program, configure, and improve automated SMT equipment to maximize yield and throughput - Design custom fixtures and tooling to improve process efficiency and ergonomics - Perform Design of Experiments (DOE) and data analysis to drive process capability and yield improvements - Train and mentor technicians on advanced equipment operation and

RF Software Engineer (Starshield) Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. RF SOFTWARE ENGINEER (STARSHIELD) Starshield leverages SpaceX's Starlink technology and launch capability to support national security efforts. While Starlink is designed for consumer and commercial use, Starshield is designed for government use, with an initial focus on earth observation, communications, and hosted payloads. As a RF software engineer on the Starshield team, you will be working on advanced development programs in support of US National Security. You will work with a team of RF engineers, DSP engineers, software engineers, hardware engineers and end users to design and build RF capabilities for proliferated communications and remote sensing in low earth orbit. You will work in a highly collaborative and fast-paced environment, where we are exploring unsolved problems and applying the SpaceX mindset of iterating rapidly to go from design and demo to operational capability at lightning pace. RESPONSIBILITIES: - Drive program-level decisions on RF system designs - Research novel solutions for unique large-scale satellite RF systems - Design, build, validate, and automate RF test benches for full characterization of custom RF designs, often involving vector network analyzers (VNA), vector signal generators (VSG), vector signal analyzers (VSA), spectrum analyzers, load pulls, RF power meters, high-speed oscilloscopes, and other common

Mechanical Integration & Test Engineer (Starshield) Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MECHANICAL INTEGRATION & TEST ENGINEER (STARSHIELD) Integration and Test engineers are responsible for understanding every system on the satellite and across our user products. Engineers on this team must have a working knowledge of design, schematics, operations, manufacturing, testing, and flight. A successful Integration and Test Engineer demonstrates engineering intuition and critical thinking and is comfortable working under ambiguous requirements with minimal oversight. Combining these skills, these engineers face challenges across a wide variety of work centers at the company, and the team is frequently asked to tackle new, inter-departmental development projects. The ultimate goal of the Integration and Test team is to ensure that satellites and customers achieve their mission. RESPONSIBILITIES: - Manage integration build flow and test operations - Evaluate proposed designs for manufacturability and integration - Interface with both engineers and technicians to optimize manufacturing and automation - Develop and refine manufacturing assembly procedures based on lessons learned - Enable day-to-day execution of the vehicle integration and test flow - Evaluate non-conformances to determine root cause and create actionable items and system improvements BASIC QUALIFICATIONS: - Bachelor's degree in an engineering discipline - 1+ years of design and/or hands-on manufacturing experience (internships,

Supplier Development Engineer, Harnessing (Starlink) Redmond, WA SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. SUPPLIER DEVELOPMENT ENGINEER, HARNESSING (STARLINK) Starlink demands a new type of supply chain. We require our suppliers to provide premium quality with rapidly evolving designs at commercial scale volumes. We are actively looking for highly motivated candidates who possess comprehensive knowledge of manufacturing and quality tools and have unrelenting motivation to enable suppliers for success. This position requires a combination of proven leadership and technical capabilities. RESPONSIBILITIES: - Own continuity of supply for copper and fiber cable harnessing on the Starlink program - Collaborate with design, R&D, commercial supply chain, hardware reliability, and production teams to manage suppliers and deliver world class products for our customers - Support procurement team to strategically source parts matched with supplier capabilities by reviewing and assessing supplier manufacturing processes and quality systems - Identify, audit, and onboard new suppliers - Develop and implement supplier technical requirements and quality flow downs to meet hardware manufacturing needs - Implement and monitor production part approval process (PPAP) with selected suppliers to enable rate production - Ensure qualification and reliability activities at suppliers are in line with requirements - Develop and approve process controls to control critical characteristics - Recommend technical product improvements to