CDM Smith jobs

Project Manager III Creates project definitions, schedules, budgets and objectives for projects using lessons learned. Prepares detailed statements of work with associated work breakdown structures and gains concurrence and approval from internal and external stakeholders regarding various project aspects. Assesses potential project risk and outlines risk mitigation solutions. Ensures adherence to company and project management policies, procedures, and practices. Manages project costs and is responsible for ensuring profitability. Identifies, quantifies, and communicates residual risk (time and cost). Creates and reviews timely client billings with internal billing support. Responsible for ensuring timely client payment and follows up on outstanding client invoices to obtain payment. Reviews and approves subcontractor/vendor invoices to ensure timely payment to outside resources. Performs ongoing review of project status. On an ongoing basis, monitors project risks; identifies possible risks and recommends and implements risk mitigation solutions; escalates as appropriate. Manages project change using change management protocols; determines appropriate changes or alternate paths based upon performance and metrics. Works in conjunction with team members and internal and external stakeholders to manage changes to requirements and schedule of the project. Ensures proper review of project scope by safety managers and proper implementation of safety plans. Provides timely response to audit corrective actions identified by external or internal audits. Plans and conducts work requiring judgment in the independent evaluation, selection, and application of standard engineering or construction techniques, procedures, and criteria. Provides guidance to drafters/designers, engineers, craft workers, other project team members, contractors or subcontractors. Develops and implements project resource plan

Geotechnical Engineer 2 CDM Smith is seeking a geotechnical engineer to join our Infrastructure Services team in Atlanta. Under general supervision, creates excavation, dewatering, shallow/deep foundations, dams/reservoirs/levees, geo-environmental projects, etc. engineering designs of basic to moderate complexity to meet client project requirements. Reviews draft designs for compliance with federal, state and local regulations. Ensures that firm policies and practices are followed on all designs. Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications. Updates design requirements as necessary. Performs soil sampling analyses and modeling. Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.. Submits technical papers and designs for publishing to technical journals. Performs other duties as required. May create or work with a team to create a poster or other presentation material for a conference.

Building Information Modeler (BIM) 5 CDM Smith's Water Services Group is seeking an experienced Building Information Modeler to support site development and water infrastructure projects in Albuquerque, NM; Phoenix, AZ; or El Paso, TX. This role is intended for an appropriately experienced modeling professional who can independently develop, manage, and deliver Civil 3D models and construction plan sets across multiple disciplines with minimal guidance. This position supports both public- and private-sector projects and requires a candidate who is detail-oriented, self-directed, and comfortable working in a fast-paced, delivery-driven environment where modeling resources are often constrained and initiative is expected. Roles and responsibilities may include, but are not limited to the following regarding water infrastructure projects: • Develop and manage Civil 3D models from conceptual and preliminary layouts through fully developed IFC-level models, often using best available or incomplete data. • Independently establish and refine: horizontal alignments and vertical profiles; sample lines, section views, and cross-section production; complex surfaces using corridors, feature lines, grading objects, and breaklines. • Perform pressure and gravity pipe modeling for water, wastewater, and storm systems. • Generate automated plan, profile, and cross-section sheets in accordance with firm and client standards. • Produce coordinated, construction-ready plan sets throughout all phases of project delivery. • Perform earthwork determinations and volume analyses using modeled surfaces. • Develop quantities and calculations derived directly from models, ensuring consistency with project assumptions and design intent. • Maintain robust data management practices, including file structure, surfaces, references, and model integrity across project lifecycles. •

Bridge Engineer 5 To support our continued growth in New England, CDM Smith is seeking an experienced Bridge Engineer to join our well‑established and expanding bridge design practice in the Boston area. This role is ideal for a technically strong engineer who wants to lead meaningful work, influence project outcomes, and help shape the future of bridge design across Massachusetts and the Northeast. In this position, you will provide technical leadership on a wide range of bridge projects-from routine rehabilitation to complex, signature structures-serving MassDOT, MBTA, Massport, and other major transportation owners. You will be involved throughout the full project lifecycle, from planning and scoping through PS&E development and construction engineering services. Why CDM Smith? Our New England bridge team delivers innovative, high‑quality designs using the latest tools, materials, and construction methods. We are leaders in the application of accelerated bridge construction (ABC) techniques and advanced structural modeling, and we work across all major delivery methods including Design‑Bid‑Build, Design‑Build, and CM‑at‑Risk. This role offers the opportunity to work on projects that are visible, technically challenging, and regionally impactful. Key Responsibilities Serve as a key technical contributor and task lead on bridge design projects throughout Massachusetts and New England. Lead and participate in all phases of bridge design, including scoping, alternatives analysis, and PS&E development. Design a variety of bridge types, including steel, concrete, prestressed, and post‑tensioned structures. Perform design of associated structures such as retaining walls, foundations, and gantries. Conduct bridge load ratings and support inspection and rehabilitation efforts. Participate

Senior Electrical Engineer - Physical Substation As a Senior Substation Engineer - Physical, you'll lead the design and execution of extra high voltage (EHV) substations (230kV-765kV), ensuring safe, reliable, and cost-effective solutions for clients. This hybrid role, based out of one of CDM Smith's offices, blends hands-on technical design with project leadership, client engagement, and mentorship of junior engineers. You'll play a key role in advancing critical infrastructure while growing your expertise in a collaborative environment. Job Description: - Electrical Engineer - Physical - Lead the design and execution of EHV substation projects, including physical layout, protection and control systems, grounding, and equipment specifications. - Serve as the technical authority and mentor for engineering teams, providing guidance on design standards, codes, and best practices. - Oversee and validate technical deliverables, ensuring alignment with client requirements, industry standards, and internal quality protocols. - Interface directly with clients, vendors, and subcontractors to define project scope, resolve technical issues, and ensure successful project delivery. - Manage project budgets, schedules, and resource allocation across multiple concurrent substation projects. - Develop and review scoping documents, engineering calculations, and technical specifications for EHV substations (typically 230 kV to 765 kV). - Supervise and delegate tasks to junior engineers and designers, ensuring quality and consistency in engineering output. - Lead internal and external coordination efforts across disciplines and stakeholders to support integrated project delivery. - Conduct internal quality assurance reviews and ensure compliance with CDM Smith's quality management systems. - Support continuous improvement initiatives, change management, and

CDM PM Bangalore, Karnātaka, India Embrace the opportunity to become a Clinical Data Manager Project Manager and drive operational excellence in clinical data management. Lead multiple studies, mentor junior staff, and ensure compliance with global standards. Make a real impact in a dynamic environment supporting top pharmaceutical and biotech clients. Grow your career with us and shape the future of clinical research.

Civil Engineer 2 (October 2026 Start!) Under direct supervision, creates basic to moderate complexity engineering designs involving site layout development, site grading and drainage, hydraulics and hydrology calculations, water distribution systems, collection systems, storage tanks and impoundments, foundation designs, stormwater infrastructure and treatment, and occasionally single-story structures. Reviews draft designs for compliance with federal, state and local regulations. Ensures that firm policies and practices are followed on all designs. Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications. Updates design requirements as necessary. Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.. Submits technical papers and designs for publishing to technical journals. Performs other duties as required. May create or work with a team to create a poster or other presentation material for a conference.

Construction Management Professional 7 - LSLR/SDWMR Plans, manages, and oversees multiple -contract projects of moderately complex nature on a large Program. Manages the day-to-day activities of construction representatives, construction coordinators and construction managers on projects. Coordinates and controls all construction management activities, including critical path method (CPM), scheduling and claims administration. Interprets plans and specifications for clients, contractors, and the company's field personnel. Provides internal consultation to construction representatives and serves as a technical resource to other function groups within the division. Provides direction to Shop Drawing professionals to develop project related shop drawings. Coordinates and disseminates shop drawings to project stakeholders, as necessary. Working with sales staff and project managers, contributes to the development of new opportunities for business through proposal preparation and general contact with current and potential clients. Reviews government and funding agency regulations to provide consultative services that reflect an up-to-date knowledge and understanding of legal requirements. Works alongside other disciplines/teams on the program towards the Program's success. Attends outreach meetings with premise owners, neighborhood meetings, and other related events to effectively convey information about the program and answer's residents' questions and concerns. Holds construction contractors responsible; holds meetings with the Contractor, Client and other stakeholders as needed to meet the overarching program goals. Mentors and guides junior and mid-level staff. Performs other duties as required.

Structural Engineer 4 As a member of this team you would contribute to CDMS's mission. The successful candidate will: •Supervise & guide structural engineers and drafters and having full technical responsibility for interpreting, organizing, execution complex assignments. •Prepare scope of work and budget estimates, and monitor progress. •Independently handling, decision making, communicating with other CoPs on the assigned projects. •Acts as mentor for Engineers & drafters •Forecast workload and schedules. •Develop structural design criteria for projects. •Analyze and design structures for water and wastewater treatment, and other facilities. •Prepare structural design calculations and check calculations. •Direct the development of structural drawings. Coordinate design with other disciplines. •Review or write specifications. Develop new specifications as needed. •Perform engineering services during construction, including review of shop drawing submittals and response to contractor questions. •Design & provide solution to the modification of existing structures •Conduct condition assessments of existing structures and prepare reports. •Manage tasks on large projects or manage number of small projects. •Participate in new business development. •Actively participate in Technical Knowledge Management (TKM) site, share your knowledge with other members in the group

Senior Construction Program Manager Working independently, provides oversight and technical guidance on highly complex consulting analyses (e.g., operations improvement, Human Resources, organizational design, etc.) to support client business needs. Working independently, provides oversight and technical guidance on the preparation of highly complex sections of management consulting reports. Leads the creation of highly complex recommendations for improvements to client programs. Working independently, contacts clients to collect or review datasets and/or presentations. Provides project status updates to clients, as required. Manages implementation plans as appropriate. Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs). Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future organizational needs. Provides technical guidance and training to more junior staff. Mentors more junior staff and develops them for future growth within the discipline and firm. Performs other duties as required. Participate in Communities of Practice (CoP) activities. May participate in professional association and societies, attend conferences, contribute to papers, etc.

Project Manager V Creates project definitions, schedules, budgets and objectives for projects using lessons learned. Prepares detailed statements of work with associated work breakdown structures and gains concurrence and approval from internal and external stakeholders regarding various project aspects. Assesses potential project risk and outlines risk mitigation solutions. Ensures adherence to company and project management policies, procedures, and practices. Manages project costs and is responsible for ensuring profitability. Identifies, quantifies, and communicates residual risk (time and cost). Creates and reviews timely client billings with internal billing support. Responsible for ensuring timely client payment and follows up on outstanding client invoices to obtain payment. Reviews and approves subcontractor/vendor invoices to ensure timely payment to outside resources. Performs ongoing review of project status. On an ongoing basis, monitors project risks; identifies possible risks and recommends and implements risk mitigation solutions; escalates as appropriate. Manages project change using change management protocols; determines appropriate changes or alternate paths based upon performance and metrics. Works in conjunction with team members and internal and external stakeholders to manage changes to requirements and schedule of the project. Ensures proper review of project scope by safety managers and proper implementation of safety plans. Provides timely response to audit corrective actions identified by external or internal audits. Plans and conducts work requiring judgment in the independent evaluation, selection, and application of standard engineering or construction techniques, procedures, and criteria. Provides guidance to drafters/designers, engineers, craft workers, other project team members, contractors or subcontractors. Develops and implements project resource plan

Senior Project Architect - Transit Facilities CDM Smith is a multi-discipline engineering and architectural firm. Our firm is responsible for large-scale water and wastewater plant design, transit facilities, industrial facilities, office space design, federal facilities, facility planning and condition assessment work. As a Senior Project Architect at CDM Smith specializing in transit facilities, you will have the opportunity to be a part of a growing collaborative multidisciplinary team of technical experts working on challenging projects in the transportation business portfolio, including passenger stations, intermodal transit centers, maintenance and operations facilities, and advisory services. The Senior Project Architect will have the following responsibilities: - Oversee and work with junior staff to plan, program, and formulate building design and prepare design presentation and construction contract documents. - Develop building design criteria directly with clients. Lead preparation of presentation materials and make presentations. - Lead development and coordination of building design and construction contract documents with architectural and multi-discipline engineering staff. - Lead and mentor project architects and junior architectural staff on multi-discipline projects. - Determination of construction materials, technologies and methodologies for detailing. - Preparation and editing of technical specifications. - Confirm compliance with applicable planning, zoning, and building codes and regulations, including coordination with agencies having jurisdiction. - Serve as Quality Control and independent reviewer for other architects work. - Lead development of project budgets and schedules, both internal and external. Monitor projects through close out. - Support sales, meet with clients, and serve as a Project Technical Lead for Architectural

Project Manager IV • Creates project definitions, schedules, budgets and objectives for projects using lessons learned. • Prepares detailed statements of work with associated work breakdown structures and gains concurrence and approval from internal and external stakeholders regarding various project aspects. • Assesses potential project risk and outlines risk mitigation solutions. • Ensures adherence to company and project management policies, procedures, and practices. • Manages project costs and is responsible for ensuring profitability. • Identifies, quantifies, and communicates residual risk (time and cost). • Creates and reviews timely client billings with internal billing support. • Responsible for ensuring timely client payment and follows up on outstanding client invoices to obtain payment. • Reviews and approves subcontractor/vendor invoices to ensure timely payment to outside resources. • Performs ongoing review of project status. • On an ongoing basis, monitors project risks; identifies possible risks and recommends and implements risk mitigation solutions; escalates as appropriate. • Manages project change using change management protocols; determines appropriate changes or alternate paths based upon performance and metrics. • Works in conjunction with team members and internal and external stakeholders to manage changes to requirements and schedule of the project. • Ensures proper review of project scope by safety managers and proper implementation of safety plans. • Provides timely response to audit corrective actions identified by external or internal audits. • Plans and conducts work requiring judgment in the independent evaluation, selection, and application of standard engineering or construction techniques, procedures, and criteria. • Provides guidance to

CEI Roadway and Bridge Construction Inspector 3 Our Transportation Construction, Engineering and Inspection group assists in all levels of federal, public, private, and international organizations by offering construction services for transportation systems that reflect community needs. Our value-added program management, best-in-class design-build expertise, and unparalleled sustainability and economic solutions, build partnerships and create solutions for current and future environmental and infrastructure challenges. CDM Smith's Construction Engineering and Inspection team is seeking a candidate that will inspect and monitor construction activities at various field site locations in Fairmont, WV. Inspection activities are primarily routine and standardized. Candidate will work under direct supervision from higher level inspectors and engineers. Work requires knowledge of materials, methods, and equipment used in highway construction; knowledge of geometry and basic mathematics; ability to read, interpret and explain construction plans and drawings, contract provisions, and specifications; and communications ability. Primary Responsibilities will be: - Perform inspections of traffic control, environmental controls, layout, construction methods and materials, and all issues concerning the construction of a project under direct supervision. - Determine the acceptability of the day‐to‐day work performed by the contractor. Review and recommend the acceptance or rejection of daily reports submitted by the contractor, perform inspection of the contractor's quality control procedures and material testing, and verify that procedures are in conformance with the approved Quality Control Plan and established procedures. - Candidate must also be able to review material testing procedures and results for conformance to the contract and measure quantities of materials placed. May be

Geotechnical Engineer 2 CDM Smith is seeking a junior geotechnical engineer to join our Infrastructure Services Team in Boston! Under general supervision, creates excavation, dewatering, shallow/deep foundations, dams/reservoirs/levees, geo-environmental projects, etc. engineering designs of basic to moderate complexity to meet client project requirements. Reviews draft designs for compliance with federal, state and local regulations. Ensures that firm policies and practices are followed on all designs. Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications. Updates design requirements as necessary. Performs soil sampling analyses and modeling. Contributes to firm's Techincal Knowlegde Management (TKM) by developing white papers and technical design documentation of new or special case designs, studies, etc.. Submits technical papers and designs for publishing to technical journals. Performs other duties as required. May create or work with a team to create a poster or other presentation material for a conference.

Geotechnical Engineer 1 CDM Smith is hiring an entry level geotechnical engineer to join our Infrastructure Services Team in Latham. Under direct supervision, creates excavation, dewatering, shallow/deep foundations, dams/reservoirs/levees, geo-environmental projects, etc. engineering designs of basic complexity to meet client project requirements. Reviews draft designs for compliance with federal, state and local regulations. Ensures that firm policies and practices are followed on all designs. Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications. Updates design requirements as necessary. Performs soil sampling analyses and modeling. Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.. Submits technical papers and designs for publishing to technical journals. Performs other duties as required. May create or work with a team to create a poster or other presentation material for a conference.

Geotechnical Engineer 2 (Recent/August/December Master's Grads) CDM Smith is hiring an entry-level geotechnical engineer to join our Infrastructure Services Team in Latham. Under general supervision, creates excavation, dewatering, shallow/deep foundations, dams/reservoirs/levees, geo-environmental projects, etc. engineering designs of basic to moderate complexity to meet client project requirements. Reviews draft designs for compliance with federal, state and local regulations. Ensures that firm policies and practices are followed on all designs. Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications. Updates design requirements as necessary. Performs soil sampling analyses and modeling. Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.. Submits technical papers and designs for publishing to technical journals. Performs other duties as required. May create or work with a team to create a poster or other presentation material for a conference.

Civil Engineer 1 CDM Smith is seeking a Civil Engineer 1 to join our Geotechnical Engineering Team in Cincinnati. This is an AutoCAD based role. Under direct supervision, creates basic complexity engineering designs involving site layout development, site grading and drainage, hydraulics and hydrology calculations, water distribution systems, collection systems, storage tanks and impoundments, foundation designs, stormwater infrastructure and treatment, and occasionally single-story structures. Reviews draft designs for compliance with federal, state and local regulations. Ensures that firm policies and practices are followed on all designs. Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications. Updates design requirements as necessary. Contributes to firm's Technical Knowledge Management (TKM) by developing white papers and technical design documentation of new or special case designs, studies, etc.. Submits technical papers and designs for publishing to technical journals. Performs other duties as required. May create or work with a team to create a poster or other presentation material for a conference.

Construction Management Professional 6 Plans, manages, and oversees multiple small to medium size construction projects of a routine to moderately complex nature, a single large project, or multiple-contract projects of routine nature. May direct the day-to-day activities of construction representatives and construction coordinators on projects. Becomes familiar with project contract documents for each project, coordinates, and controls all construction management activities, including critical path method (CPM), and scheduling and claims administration. Interprets plans and specifications for clients, contractors, and the company's field personnel. Provides direction to shop drawing professionals to develop project related shop drawings. Coordinates and disseminates shop drawings to project stakeholders, as necessary. Provides internal consultation to construction representatives and serves as a technical resource to other functional groups. Documents deficiencies, expected cost overruns, issues with materials and other related construction issues or risks related to their area of oversight. Prepares related reports (ex: monthly progress reports, etc.). Maintains daily report of construction activities. Participates with sales staff, practice leaders and project managers in developing new opportunities for business through proposal preparation and general contact with current and potential clients. Reviews government or funding agency regulations in order to provide consultative services that reflect an up-to-date knowledge and understanding of legal requirements. Performs other duties as required.

Highway/Roadway Engineer 3 Join CDM Smith's New England Transportation team in E. Hartford, CT as a Design Engineer for highway design projects across the region. You'll play a pivotal role in advancing technical excellence and delivering innovative solutions for complex transportation challenges. Key Responsibilities Design Development: With general direction develop project design criteria, alignments, construction plans, specifications, and cost estimates. Collaboration: Work closely with Task Leaders and Project Technical Leaders to deliver high-complexity projects tailored to unique client requirements. Compliance: Review draft designs for compliance with federal, state, and local regulations. QAQC: Complete quality reviews of project deliverables, ensuring firm policies and practices are followed on all designs. Site Studies: Perform site reviews and studies to ensure designs align with location specifications; update design requirements as needed. Mentorship: Provide technical guidance and training to more junior staff. Reviews the work of more junior staff.

Construction Manager 1 Under general supervision, leads portions of the prime project contract, including staff management. Advises manager of the overall project on their portion of the overall project. Implements project plan of overall project manager. Implements project resource plan and manages the staffing of assigned portions of the prime project. Determines and coordinates the proper staffing within the project including identification of outside resources needed (subs/vendors) and ensures procurement processes are followed. Clearly communicates project deadlines, assignments and objectives to project team members. Assigns work and provides direction to project staff with regard to timeliness and completion of project objectives. Coaches project staff and provides feedback to staff and to project staff's supervisors on project performance; escalates any performance issues to appropriate management and human resources. Identifies, quantifies, and communicates residual risk (time and cost). Creates and reviews timely client billings with internal billing support. Responsible for ensuring timely client payment and follows up on outstanding client invoices to obtain payment. Reviews and approves subcontractor/vendor invoices to ensure timely payment to outside resources. Creates project definitions, schedules, budgets and objectives for assigned portions of overall project. Prepares detailed statements of work with associated work breakdown structures and gains concurrence and approval from internal and external stakeholders regarding various project aspects. Assesses potential project risk and outlines risk mitigation solutions. Ensures adherence to company and project management policies, procedures and practices. Performs other duties as required. Builds, maintains and manages strong client relationships. Ensures client satisfaction by delivering quality, on-time

Water/Wastewater Design Engineer Join CDM Smith's Manchester team and build your career in the water and wastewater industry alongside industry‑leading experts. You will have the opportunity to work on some of the region's largest and most complex water infrastructure projects, while benefiting from strong technical mentorship, professional development, and clear paths for growth. In this role, you'll contribute to the planning and design of water, wastewater, and environmental infrastructure projects, working collaboratively within multidisciplinary teams and supporting projects from concept through delivery. Key Responsibilities Under limited supervision, develop engineering designs of basic to moderate complexity for water and wastewater treatment facilities, water and sewer systems, pipelines, pump stations, remediation sites, and solid waste facilities. Review design documents and technical reports to ensure compliance with federal, state, and local regulations, as well as firm standards and best practices. Conduct site visits, field reviews, and technical studies to confirm design assumptions and location‑specific requirements. Update design criteria and technical requirements as project needs evolve. Perform water quality analyses and modeling to support planning and design decisions. Contribute to the firm's Technical Knowledge Management (TKM) program by developing white papers, documenting innovative or specialized designs, and sharing lessons learned. Prepare and submit technical papers, design documentation, and presentations for publication in industry journals and forums. Collaborate with business development and sales teams to support proposals and responses to requests for proposal (RFPs). Review proposal content for technical accuracy, regulatory compliance, and alignment with industry best practices. Meet with current and prospective clients to

Construction Representative 2 Under direct supervision, performs construction inspections of basic to moderate complexity. Evaluates the condition of the structure. Documents deterioration, structural condition, and any needed sampling. Documents deficiencies between design and execution of construction. Performs other duties as required. Upon discovery of deficiencies or issues with construction work, provides reports to project leadership.

Project Manager II Creates project definitions, schedules, budgets and objectives for projects using lessons learned. Prepares detailed statements of work with associated work breakdown structures and gains concurrence and approval from internal and external stakeholders regarding various project aspects. Assesses potential project risk and outlines risk mitigation solutions. Ensures adherence to company and project management policies, procedures, and practices. Manages project costs and is responsible for ensuring profitability. Identifies, quantifies, and communicates residual risk (time and cost). Creates and reviews timely client billings with internal billing support. Responsible for ensuring timely client payment and follows up on outstanding client invoices to obtain payment. Reviews and approves subcontractor/vendor invoices to ensure timely payment to outside resources. Performs ongoing review of project status. On an ongoing basis, monitors project risks; identifies possible risks and recommends and implements risk mitigation solutions; escalates as appropriate. Manages project change using change management protocols; determines appropriate changes or alternate paths based upon performance and metrics. Works in conjunction with team members and internal and external stakeholders to manage changes to requirements and schedule of the project. Ensures proper review of project scope by safety managers and proper implementation of safety plans. Provides timely response to audit corrective actions identified by external or internal audits. Plans and conducts work requiring judgment in the independent evaluation, selection, and application of standard engineering or construction techniques, procedures, and criteria. Provides guidance to drafters/designers, engineers, craft workers, other project team members, contractors or subcontractors. Develops and implements project resource plan