I'm looking for a job. I exported this list from FewerJobs.com - a curated job board.

Please:
1. Rank these jobs by fit for me, given my resume / skills.
2. Highlight the top 5 with a one-sentence rationale each.
3. Flag any concerns, including benefit values without source-backed evidence.
4. Suggest one or two filter changes I could make on FewerJobs to find more good matches.

Filters I applied:
- q: Ford Motor Company
- quality_floor: default
- match_401k_strict: true
- parental_strict: true
- non_birth_strict: true
- pto_strict: true
- include_older: false
- apply_url_verified: false
- page: 10
- per_page: 100
- sort: relevance

Jobs (100 total):

---
TITLE: Senior Motor Design Engineer
EMPLOYER: Ametek
LOCATION: Work Location (Country) United States | Remote/Onsite Onsite (remote)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.ametek.com/job/Woodstock-Senior-Motor-Design-Engineer-NY-12498/1383047800/
EXCERPT: Senior Motor Design Engineer Work Location (Country) United States | Remote/Onsite Onsite As the Senior Motor Design Engineer with AMETEK Rotron, you will provide critical support for the design and development of engineering projects. In this role you will support the design, development, and testing of various types of electric motors, including both brushless DC and AC induction motors and ranging from 7W to over 3KW in electrical power. You will use your ability to translate technical information into basic terms and effectively communicate them to the build and test teams. You will also report to the Director of Engineering but receive your daily project priorities from the program manager in charge of your assigned new product development projects. Responsibilities: Support new designs, continued improvements, and engineering changes Ability to work with minimal supervision, Self-Starter. Ability to learn and apply new skills Technical accuracy is very important Technical support for Marketing/Sales, Production and Program Management Support warranty and product failure reviews, including documenting corrective actions Develop, technical reviews, and approve engineering drawings, BOMs, test plans, and technical reports Qualifications: Knowledgeable of Motor assembly and subcomponents with experience with: Stator & rotor assemblies Including laminations, cores, housing, copper wire, insulation paper, shafts, bearings, magnets, end rings, balance rings, and position sensors Strong foundation in electromagnetics including: Single and three phase AC induction mo
---
TITLE: Trim Product Engineer (seat cover)
EMPLOYER: Magna International Inc.
LOCATION: Novi, Michigan, US (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://magna.wd3.myworkdayjobs.com/Magna/job/Novi-Michigan-US/Trim-Product-Engineer--seat-cover-_R00240385-1
EXCERPT: Trim Product Engineer (seat cover) Novi, Michigan, US posted: Posted 30+ Days Ago
---
TITLE: Laborer (Motor Vehicle Operating) (Seasonal)
EMPLOYER: Department of the Interior
LOCATION: Bar Harbor, Maine (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-11
HIRE_STATES: ME
APPLY_URL: https://www.usajobs.gov:443/job/872660100
EXCERPT: Laborer (Motor Vehicle Operating) (Seasonal) Bar Harbor, Maine Summary This position is located in the Maintenance Division at Acadia National Park. The typical seasonal period is May-March but can be variable during these months due to weather conditions, project needs, or funding. Anticipated Entry on Duty: Mid July 2026 All applications submitted by 11:59 (EST) on the closing day will receive consideration. Duties Laborer (Motor Vehicle Operating) Standard Duties: Routine maintenance and construction of hiking trails, trail drainages (water bars, dips, and culverts), iron pins and handrails, stonework, and trail bridges. Marks trails with rock cairns and blazes. Moves materials to job site. Safely and effectively uses and maintains hand and power tools required for the job and has the ability to maintain those tools properly Operates and performs minor operator maintenance on light duty motor vehicles within the park. Requirements U.S. Citizenship required. Appointment subject to background investigation and favorable adjudication. Meet Selective Service Registration Act requirement for males Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program. You will be required to operate a government (or private) motor vehicle as part of your official duties; a valid driver's license is required. You will be required to submit a Motor Vehicle Operator's License and Driving Record. You must also submit (within a State sealed envelope or submitted directly by the State authorities), and at your own expense, all certified driving records from all States that disclose all valid driver's licenses, whether current or past,
---
TITLE: Oil Change Team Member - Shop#755 - 1715 North Telegraph Road
EMPLOYER: Driven Brands Holdings Inc
LOCATION: Monroe, Michigan, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-01-15
K401_MATCH: yes (not source-backed)
APPLY_URL: https://wd1.myworkdaysite.com/recruiting/drivenbrands/DrivenBrandsCareerSite/job/1715-N-Telegraph-Rd-Monroe-MI-48162/Lube-Technician_JR104537-1/apply
EXCERPT: Oil Change Team Member - Shop#755 - 1715 North Telegraph Road Monroe, Michigan, United States of America Embrace the role of Take 5 Oil Change as an Oil Change Team Member! No experience needed-get paid training to perform oil changes, light maintenance, and deliver top-notch customer service. Enjoy flexible schedules, growth opportunities, and great benefits. Join a friendly, energetic team and start your journey in automotive services today!
---
TITLE: Post-Doctoral Fellow - Interface of Cognitive and Motor Neuroscience - Lab of Dr. Wong
EMPLOYER: Jefferson Health
LOCATION: Montgomery County, PA (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-12
APPLY_URL: https://jeffersonhealth.wd5.myworkdayjobs.com/ThomasJeffersonExternal/job/Montgomery-County-PA/Post-Doctoral-Fellow---Interface-of-Cognitive-and-Motor-Neuroscience---Lab-of-Dr-Wong_REQ-0028206-1
EXCERPT: Post-Doctoral Fellow - Interface of Cognitive and Motor Neuroscience - Lab of Dr. Wong Montgomery County, PA posted: Posted 30+ Days Ago
---
TITLE: Machine Mechanic - Coating
EMPLOYER: Corning
LOCATION: Fairport, NY (unspecified)
SALARY: $34K-$34K
POSTED: 2026-06-12
PARENTAL_LEAVE_WEEKS: 12 (not source-backed)
NON_BIRTH_PARENT_LEAVE_WEEKS: 12 (not source-backed)
K401_MATCH: yes (not source-backed)
APPLY_URL: https://corningjobs.corning.com/job/Fairport-Machine-Mechanic-Coating-NY-14450/1378620200/
EXCERPT: Machine Mechanic - Coating Fairport, NY Requisition Number: 74153 The company built on breakthroughs. ​ Join us.​ Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible. ​ How do we do this? With our people. They break through limitations and expectations - not once in a career, but every day. They help move our company, and the world, forward. ​ ​At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more.​ Come break through with us. Corning's businesses are ever-evolving to best serve our customers, industries, and consumers. Today, we accelerate and transform life sciences, mobile consumer electronics, optical communications, display, automotive, and solar markets. We are changing the world with: Trusted products that accelerate drug discovery, development, and delivery to save lives Damage-resistant cover glass to enhance the devices that keep us connected Optical fiber, wireless technologies, and connectivity solutions to carry information and ideas at the speed of light Precision glass for advanced displays to deliver richer experiences Auto glass and ceramics to drive cleaner, safer, and smarter transportation Solar polysilicon, wafers, and innovative photovoltaic modules, enabling
---
TITLE: Electrical Engineer, Motor Control and Power Conversion Specialist
EMPLOYER: Oceaneering International
LOCATION: Hanover, MD, United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-18
K401_MATCH: yes (not source-backed)
APPLY_URL: https://ebfr.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/jobs/requisitions/job/10437
EXCERPT: Electrical Engineer, Motor Control and Power Conversion Specialist Hanover, MD, United States As an Electrical Engineer, Motor Controls and Power Conversion Specialist, serve as a vital member of the Oceaneering Aerospace and Defense Technologies (ADTECH) engineering team - an engineering center of excellence, and an exciting part of our dynamic, global enterprise. Within our Oceaneering Technologies (OTECH) group, your primary responsibility will be supporting development and application of high-power, high-efficiency motor controls, drives, active front end rectifiers, and other power conversion systems. Additionally, you may be responsible for performing diverse activities associated with the development and implementation of complex power and control systems for unique underwater robotic and electromechanical systems, helping solve our customers' toughest challenges - typically for US Navy and other US Government Department of Defense customers.
---
TITLE: Salesperson/Store Driver Store 2370
EMPLOYER: Advance Auto Parts Inc
LOCATION: Charlottesville, Virginia, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://advanceauto.wd5.myworkdayjobs.com/AdvanceExternalCareers/job/540-Twentyninth-Place-Ct-Charlottesville-VA--22901/Salesperson-Store-Driver--Store-2370_R-0500610/apply
EXCERPT: Salesperson/Store Driver Store 2370 Charlottesville, Virginia, United States of America Join our team as a Salesperson/Store Driver, where you will provide exceptional customer service and support our sales objectives. If you have a passion for automotive parts and enjoy working in a dynamic environment, we want to hear from you!
---
TITLE: Student Trainee (Information Technology) - CES Intern
EMPLOYER: Department of Defense
LOCATION: Ford Island, Hawaii (unspecified)
SALARY: $38K-$85K
POSTED: 2026-06-11
HIRE_STATES: HI
APPLY_URL: https://www.usajobs.gov:443/job/872342900
EXCERPT: Student Trainee (Information Technology) - CES Intern Ford Island, Hawaii Summary This position is being recruited under 10 USC 1599f into the Cyber Excepted Service and does NOT convey eligibility to be converted to the Competitive Service. It has been identified as a position necessary to carry out and support the mission of the US Cyber Command. It is in the Technician / Administrative Support Work Category at the Entry/Developmental Work Level within the CES Occupational Structure. It is located in the DISA-PC41. Duties Write programing code for audio/video control systems (similar to Python and C+/C++), including video matrix switching and audio signal processing. Configure, test and troubleshoot conference room audio/visual systems used at multiple classification levels. Perform configuration and testing of internet protocol voice and video conferencing systems. Provide customer support for hardware and software video conferencing systems, audio/visual. Complete formal and informal training, as well as rotational assignments intended to provide and enhance necessary technical competencies. Education To qualify at the 04 - Completion of 2 full academic years of post-high school study or an associate's degree. To qualify at the 05 - Completion of 4 academic years of post-high school leading to a bachelor's degree or equivalent degree. To qualify at the 07 - Completion of 1 full academic year of graduate level education; or Eligibility under the Superior Academic Achievement Provision and completion of a bachelor's degree. To be creditable, education must have been obtained in an accredited college or university. You must report only attendance
---
TITLE: SAP S4HANA Embedded Analytics Lead, Ford
EMPLOYER: Infosys Consulting
LOCATION: Location not specified (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-10
K401_MATCH: yes (not source-backed)
APPLY_URL: https://sjobs.brassring.com/TGnewUI/Search/home/HomeWithPreLoad?partnerid=25633&siteid=5439&PageType=JobDetails&jobid=2245307
EXCERPT: SAP S4HANA Embedded Analytics Lead, Ford In the assigned Job Role of Package Consultant 3, your Area Of Responsibility will be as below: ⦁ Analyze complex business processes to identify optimization opportunities and draft detailed requirement specifications that align with enterprise architecture standards ⦁ Define and develop solution architecture, steering customization and integration efforts based on thorough business analysis ⦁ Design and implement advanced customizations basis ERP platform's capabilities and limitations and develop critical software applications in collaboration with the development team ⦁ Develop and implement complex integration workflows to connect the ERP system with external applications, while leading large-scale data migration strategies to ensure data integrity ⦁ Implement advanced performance optimization strategies focused on scalability, reliability, and user experience, while leading compliance initiatives throughs audits, to uphold security protocols and industry standards ⦁ Develop detailed documentation for complex ERP customizations and lead training workshops tailored to various user groups, to ensure effective knowledge transfer Your contribution to the team: ⦁ Expertise in ERP systems, architecture, and advanced customization techniques ⦁ Ability to design complex integration solutions and guide large-scale data migrations ⦁ Proactive problem-solving to streamline complex requirements ⦁ A strategic mindset to align technical solutions with business goals and market trends. ⦁ Deep understanding of compliance requirements, security protocols, and performance optimization methodologies ⦁ Sector specific expertise for high quality project delivery
---
TITLE: 3rd Shift Production Operator
EMPLOYER: Continental
LOCATION: Plymouth, IN, United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-10
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.smartrecruiters.com/Continental/744000074404544-3rd-shift-production-operator
EXCERPT: 3rd Shift Production Operator Plymouth, IN, United States Company Description: The Company Continental develops pioneering technologies and services for sustainable and connected mobility of people and their goods. Founded in 1871, the technology company offers safe, efficient, intelligent, and affordable solutions for vehicles, machines, traffic, and transportation. In 2023, Continental generated sales of €41.4 billion and currently employs around 200,000 people in 56 countries and markets. Tire solutions from the Tires group sector make mobility safer, smarter, and more sustainable. Its premium portfolio encompasses car, truck, bus, two-wheel, and specialty tires as well as smart solutions and services for fleets and tire retailers. Continental delivers top performance for more than 150 years and is one of the world's largest tire manufacturers. In fiscal 2023, the Tires group sector generated sales of 14 billion euros. Continental's tire sector employs more than 56,000 people worldwide and has 20 production and 16 development sites. Are you ready to shape the future with us? Hoosier Racing Tire, the largest race tire manufacturer in the world, has continually promoted passion, pride, and success in the racing industry since 1957. Based in Plymouth, Ind. their state-of-the-art facility, including a fully integrated technology and R&D center, is solely dedicated to engineering, designing, supporting, and manufacturing the over 1,000 different types of racing and high-performance tires currently produced. Instilled with the heritage of champions, Hoosier utilizes a model sales and distribution network to deliver winning results globally. Hoosier Racing Tire is a 100% subsidiary of Continental AG. Job
---
TITLE: Principal SAP FICO Consultant, Ford
EMPLOYER: Infosys Consulting
LOCATION: Location not specified (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-10
K401_MATCH: yes (not source-backed)
APPLY_URL: https://sjobs.brassring.com/TGnewUI/Search/home/HomeWithPreLoad?partnerid=25633&siteid=5439&PageType=JobDetails&jobid=2245301
EXCERPT: Principal SAP FICO Consultant, Ford In the assigned Job Role of Package Consultant 3, your Area Of Responsibility will be as below: ⦁ Analyze complex business processes to identify optimization opportunities and draft detailed requirement specifications that align with enterprise architecture standards ⦁ Define and develop solution architecture, steering customization and integration efforts based on thorough business analysis ⦁ Design and implement advanced customizations basis ERP platform's capabilities and limitations and develop critical software applications in collaboration with the development team ⦁ Develop and implement complex integration workflows to connect the ERP system with external applications, while leading large-scale data migration strategies to ensure data integrity ⦁ Implement advanced performance optimization strategies focused on scalability, reliability, and user experience, while leading compliance initiatives throughs audits, to uphold security protocols and industry standards ⦁ Develop detailed documentation for complex ERP customizations and lead training workshops tailored to various user groups, to ensure effective knowledge transfer Your contribution to the team: ⦁ Expertise in ERP systems, architecture, and advanced customization techniques ⦁ Ability to design complex integration solutions and guide large-scale data migrations ⦁ Proactive problem-solving to streamline complex requirements ⦁ A strategic mindset to align technical solutions with business goals and market trends. ⦁ Deep understanding of compliance requirements, security protocols, and performance optimization methodologies ⦁ Sector specific expertise for high quality project delivery
---
TITLE: Oil Change Team Member - Shop#389 - 13376 Lincoln Road
EMPLOYER: Driven Brands Holdings Inc
LOCATION: Riverview, Florida, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2025-12-18
K401_MATCH: yes (not source-backed)
APPLY_URL: https://wd1.myworkdaysite.com/recruiting/drivenbrands/DrivenBrandsCareerSite/job/13376-Lincoln-Road-Riverview-FL-33578/Lube-Technician_JR104271-1/apply
EXCERPT: Oil Change Team Member - Shop#389 - 13376 Lincoln Road Riverview, Florida, United States of America All you need to do is be willing to learn, work hard, and bring a positive attitude to the shop! Maintain cleanliness of work environment. Must be able to maneuver in and out of a shallow 3' deep pit...
---
TITLE: Fund Accountant I - Alternative Investments (Hybrid)
EMPLOYER: UMB Financial CORP
LOCATION: PA - Chadds Ford - 223 Wilmington West Chester Pike (hybrid)
SALARY: $39K-$75K
POSTED: 2026-05-12
K401_MATCH: yes (not source-backed)
ADOPTION_ASSISTANCE_OFFERED: yes (not source-backed)
MENTAL_HEALTH_SUPPORT: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://umb.wd1.myworkdayjobs.com/UMBExternal/job/PA---Chadds-Ford---223-Wilmington-West-Chester-Pike/Fund-Accountant-I--II-or-III--Hybrid-_R-5634
EXCERPT: Fund Accountant I - Alternative Investments (Hybrid) PA - Chadds Ford - 223 Wilmington West Chester Pike The Alternative Investments Team provides accounting, pricing, and reconciliation services for our alternative investment fund clients. This group is a growing team that continues to add to our client portfolio. With additional clients and the evolution of client needs comes the opportunity to grow our knowledge base and expand our technological capabilities. As the Fund Accountant- Alternative Investments, you will support UMB by handling all accounting, bookkeeping, and reporting for our clients. You will have the opportunity to grow professionally, learning more complex tasks, increasing client contact, and ultimately training and reviewing peer's work. How you will spend your time: You will operate Excel and UMB accounting systems to perform general ledger accounting functions, enter trade information, price securities, and reconcile accounts. You will ensure data accuracy and prepare client financial statements and reports to share with investors. You will interact with clients to address any requests as well as handling correspondence to the client investor base. We're excited to talk with you if: Bachelor's Degree in one of the following Accounting, Finance, Investment Banking, Economics, or International Business *Fund Accountant candidates who exceed qualifications may be considered for the position(s) of a Fund Accountant II or III if minimum qualifications are met for the respective role* Deadline to apply: November 30, 2024. Compensation Range: $38,910.00 - $75,080.00 The posted compensation range on this listing represents UMB's standard for this role, but the
---
TITLE: Commercial Parts Pro Store 3475
EMPLOYER: Advance Auto Parts Inc
LOCATION: Fenton, Michigan, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://advanceauto.wd5.myworkdayjobs.com/AdvanceExternalCareers/job/1500-N-Leroy-St-Fenton-MI-48430/Commercial-Parts-Pro--Store-3475_R-0502827/apply
EXCERPT: Commercial Parts Pro Store 3475 Fenton, Michigan, United States of America Embrace the role of a Commercial Parts Pro and drive the growth of our commercial business. Leverage your automotive expertise, sales skills, and leadership to support customers, manage inventory, and supervise team members. If you have a passion for automotive parts and proven sales experience, this is your opportunity to excel!
---
TITLE: SAP S4HANA ABAP Lead, Ford
EMPLOYER: Infosys Consulting
LOCATION: Location not specified (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-10
K401_MATCH: yes (not source-backed)
APPLY_URL: https://sjobs.brassring.com/TGnewUI/Search/home/HomeWithPreLoad?partnerid=25633&siteid=5439&PageType=JobDetails&jobid=2245304
EXCERPT: SAP S4HANA ABAP Lead, Ford In the assigned Job Role of Package Consultant 3, your Area Of Responsibility will be as below: ⦁ Analyze complex business processes to identify optimization opportunities and draft detailed requirement specifications that align with enterprise architecture standards ⦁ Define and develop solution architecture, steering customization and integration efforts based on thorough business analysis ⦁ Design and implement advanced customizations basis ERP platform's capabilities and limitations and develop critical software applications in collaboration with the development team ⦁ Develop and implement complex integration workflows to connect the ERP system with external applications, while leading large-scale data migration strategies to ensure data integrity ⦁ Implement advanced performance optimization strategies focused on scalability, reliability, and user experience, while leading compliance initiatives throughs audits, to uphold security protocols and industry standards ⦁ Develop detailed documentation for complex ERP customizations and lead training workshops tailored to various user groups, to ensure effective knowledge transfer Your contribution to the team: ⦁ Expertise in ERP systems, architecture, and advanced customization techniques ⦁ Ability to design complex integration solutions and guide large-scale data migrations ⦁ Proactive problem-solving to streamline complex requirements ⦁ A strategic mindset to align technical solutions with business goals and market trends. ⦁ Deep understanding of compliance requirements, security protocols, and performance optimization methodologies ⦁ Sector specific expertise for high quality project delivery
---
TITLE: Senior Vice President Head of Product
EMPLOYER: Verra Mobility Corp
LOCATION: IL_Chicago_Office (unspecified)
SALARY: Not disclosed
POSTED: 2026-01-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://job-boards.greenhouse.io/verramobility/jobs/4643156006
EXCERPT: Senior Vice President Head of Product IL_Chicago_Office Who we are... Verra Mobility is a global leader in smart mobility. We develop technology-enabled solutions that help the world move safely and easily. We are fostering the development of safe cities, working with police departments and municipalities to install over 4,000 red-light, speed, and school bus stop arm safety cameras across North America. We are also creating smart roadways, serving the world's largest commercial fleets and rental car companies to manage tolling transactions and violations for over 8.5 million vehicles. And we are a leading provider of connected systems, processing nearly 165 million transactions each year across 50+ individual tolling authorities. Culture Verra Mobility Corporation is a dynamic, entrepreneurial company that operates with a people-first philosophy and approach. The company lives by its core values-Do What's Right, Choose Courage Over Comfort, Win Together, and Own It-in everything it does for its customers and team members. The company seeks to grow, both organically and through acquisition, to continue to be the undisputed market leader with a bias for action, customer focus, teamwork, drive for results, and commitment to excellence. Position Overview Help us shape the future of Mobility. Our organization is at a pivotal inflection point, transforming from a project-based, IT-centric execution model to a modern Product Operating Model. We are seeking a visionary Senior Vice President, Head of Product to lead this evolution and report directly to the CEO. In this role, you will architect and scale a product organization built on
---
TITLE: Diagnostic Auto Mechanic
EMPLOYER: Carvana
LOCATION: Auburn, WA (unspecified)
SALARY: $25-$39/hr
POSTED: 2026-03-27
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7763418
EXCERPT: Diagnostic Auto Mechanic Auburn, WA We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs-from light maintenance to heavy engine work-and diagnostics on our vehicles, including: Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work. Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles. Completing repairs for wheel bearings and axles, as well as vehicle climate control systems including ACs and heater cores. At Carvana, you'll receive a competitive wage and amazing perks - including but not limited to: 100% company paid healthcare, dental & vision insurance, a 401(k with a Carvana match and even a vehicle purchase discount - all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Starting Pay Rate $25-39/hr. Dependent on experience & skillset. Other perks of the Job 100% company-paid healthcare premiums Generous paid-time off and your birthday is a holiday! ASE and tool reimbursement programs Tuition reimbursement and student loan repayment Schedule: We do everything we
---
TITLE: Head of Production, Rocket Motor Systems
EMPLOYER: Anduril
LOCATION: McHenry, Mississippi, United States (unspecified)
SALARY: $225K-$298K
POSTED: 2026-01-15
APPLY_URL: https://boards.greenhouse.io/andurilindustries/jobs/5025358007?gh_jid=5025358007
EXCERPT: Head of Production, Rocket Motor Systems McHenry, Mississippi, United States Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. For our critical Rocket Motor Systems (RMS) division, we are seeking a visionary Head of Production to architect, build, and scale our manufacturing operations. Based at our pivotal McHenry, Mississippi facility, you will be the ultimate owner of all RMS production activities - from strategic planning and supply chain management to manufacturing engineering, day-to-day operations, and quality assurance. This pivotal role is responsible for leading the transition from New Product Introduction (NPI) to sustained high-rate manufacturing, ensuring unparalleled operational excellence, scalability, and strict adherence to rigorous quality and safety standards. If you are a seasoned leader ready to define the future of propulsion manufacturing and shape one of Anduril's most mission-critical business lines in a fast-paced, mission-driven environment, this unique opportunity is for you WHAT YOU'LL DO: - Lead End-to-End Production &
---
TITLE: Gasoline Trading Analyst
EMPLOYER: Exxon Mobil Corporation
LOCATION: Alternate Job Posting Location | Job City/State (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.exxonmobil.com/job/London-Gasoline-Trading-Analyst-LND-SE10SU/1379284500/
EXCERPT: Gasoline Trading Analyst Alternate Job Posting Location | Job City/State About us At ExxonMobil, our vision is to lead in energy innovations that advance modern living while reducing emissions. As one of the world's largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for. The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. We invite you to bring your ideas to ExxonMobil to help create sustainable solutions that improve quality of life and meet society's evolving needs. Learn more about our What and our Why and how we can work together. What role you will play on our team As a Gasoline Analyst, you will sit at the core of our trading operations, supporting the gasoline trading desk with high‑impact market analysis, data‑driven insights, and strategic recommendations. You will work closely with traders, senior analysts, and developers to interpret global and regional gasoline fundamentals, monitor physical and derivative flows, and identify trading opportunities across Europe, the Atlantic Basin, and key export markets. What you will do Drive gasoline analytics for the European, Mediterranean, and trans‑Atlantic markets. Shape cross‑regional trading strategies by analysing structural shifts in gasoline blending, refinery operations,
---
TITLE: Senior Director of Production, Rocket Motors
EMPLOYER: Anduril
LOCATION: McHenry, Mississippi, United States (unspecified)
SALARY: $225K-$298K
POSTED: 2026-06-06
APPLY_URL: https://boards.greenhouse.io/andurilindustries/jobs/5158207007?gh_jid=5158207007
EXCERPT: Senior Director of Production, Rocket Motors McHenry, Mississippi, United States Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. For our critical Rocket Motor Systems (RMS) division, we are seeking a visionary Head of Production to architect, build, and scale our manufacturing operations. Based at our pivotal McHenry, Mississippi facility, you will be the ultimate owner of all RMS production activities - from strategic planning and supply chain management to manufacturing engineering, day-to-day operations, and quality assurance. This pivotal role is responsible for leading the transition from New Product Introduction (NPI) to sustained high-rate manufacturing, ensuring unparalleled operational excellence, scalability, and strict adherence to rigorous quality and safety standards. If you are a seasoned leader ready to define the future of propulsion manufacturing and shape one of Anduril's most mission-critical business lines in a fast-paced, mission-driven environment, this unique opportunity is for you WHAT YOU'LL DO: - Lead End-to-End Production &
---
TITLE: Lead Mechanic - Night Shift
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: $41.07-$45.59/hr
POSTED: 2026-06-12
APPLY_URL: https://jobs.xpo.com/job/La-Salle-Lead-Mechanic-Night-Shift-IL-61301/1395274900/
EXCERPT: Lead Mechanic - Night Shift Country US Wha t you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Expected pay range: $41.07 to $45.59 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Night Shift, 11:00PM-7:30AM Company-provided uniforms Tool allowance of $400 per quarter This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with
---
TITLE: Lead Diesel Mechanic
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: $43.9-$45.42/hr
POSTED: 2026-06-12
APPLY_URL: https://jobs.xpo.com/job/Carlstadt-Lead-Diesel-Mechanic-PA-07072/1396121200/
EXCERPT: Lead Diesel Mechanic Country US What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Expected pay range: $43.90 to $45.42 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. $1/hour shift premium 6:00pm - 2:30am, Monday - Friday Company-provided uniforms Tool allowance of $400 per quarter This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company h
---
TITLE: FP&A Manager, Electrical Sector
EMPLOYER: Eaton Corporation
LOCATION: Beachwood, Ohio, USA, 44122 (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://eaton.eightfold.ai/careers/job/687236722512
EXCERPT: FP&A Manager, Electrical Sector Beachwood, Ohio, USA, 44122
---
TITLE: Senior Manager, Developmental Operations
EMPLOYER: Anduril
LOCATION: McHenry, Mississippi, United States (unspecified)
SALARY: $129K-$171K
POSTED: 2025-06-20
APPLY_URL: https://boards.greenhouse.io/andurilindustries/jobs/4769898007?gh_jid=4769898007
EXCERPT: Senior Manager, Developmental Operations McHenry, Mississippi, United States Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. ABOUT THE TEAM Anduril Rocket Motor Systems is seeking an accomplished Senior Manager of Developmental Operations to oversee the development manufacturing activities of Rocket Motor Systems at our state-of-the-art facilities. In this strategic role, you will be instrumental in establishing, managing, and optimizing developmental operations processes for our cutting-edge rocket motor systems, ensuring top-tier quality and efficiency while preparing for the transition to full-rate production. WHAT YOU'LL DO - Embrace the ownership and leadership for the growth of developmental operations to include maturing processes, improving workflows, and defining systems in alignment with Anduril's rigorous AS9100 quality management system, EHS systems, and drive efficiency improvements through continuous improvement efforts. Functions will include: - Tooling design and fabrication - Chemical manufacturing - Testing - Hardware integration - Electrical Engineering Systems - Managing a diverse organization of
---
TITLE: Industrial Mechanic (Pumps, Diesel Engines, and Motors)
EMPLOYER: Federal Signal Corp
LOCATION: Joe Johnson Equipment (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-28
K401_MATCH: yes (not source-backed)
APPLY_URL: https://recruiting2.ultipro.com/FED1002FSC/JobBoard/d5675b81-d6f5-4226-9f8c-be296cda2308/OpportunityDetail?opportunityId=781ecd18-c46c-4f64-8a1b-ca2adb3d1223
EXCERPT: Industrial Mechanic (Pumps, Diesel Engines, and Motors) Joe Johnson Equipment Perform duties to diagnose, troubleshoot and repair system components of a Waterblaster and accessories to support immediate and future rental opportunities.
---
TITLE: Salesperson/Store Driver Store 8016
EMPLOYER: Advance Auto Parts Inc
LOCATION: Mount Pleasant, Michigan, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://advanceauto.wd5.myworkdayjobs.com/AdvanceExternalCareers/job/900-N-Mission-St-Mount-Pleasant-MI-48858/Salesperson-Store-Driver--Store-8016_R-0509425/apply
EXCERPT: Salesperson/Store Driver Store 8016 Mount Pleasant, Michigan, United States of America Join our team as a Salesperson/Store Driver, where you will provide exceptional customer service and support our sales objectives. If you have a passion for automotive parts and enjoy working in a dynamic environment, we want to hear from you!
---
TITLE: Lead Mechanic
EMPLOYER: Aersale CORP
LOCATION: Millington - MILLING (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-01
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://aersale.wd5.myworkdayjobs.com/AER1001/job/Millington---MILLING/Lead-Mechanic_JR100322
EXCERPT: Lead Mechanic Millington - MILLING Who we are: AerSale® is a global leader and market innovator specializing in aviation products and services to meet the growing demand for aftermarket support in global passenger, cargo, and government segments. Featuring complete aircraft nose-to-tail, value-added offerings, including Aircraft & Component Maintenance, Repair and Overhaul Services (MRO), Aircraft & Engine Sales and Leasing, Used Serviceable Material (USM) Sales and Parts Exchange, Flight Equipment Asset Management Services, Internally developed aircraft and component modifications (engineered solutions) designed to enhance aircraft performance and operating economics (e.g. AerSale®, AerTrak® and AerAware). For more information, visit us at www.aersale.com. What we Offer: • Medical Insurance • 100% Employer Paid Dental, Vision, Life, Short and Long Term Disability Insurance • 401K with Employer Contribution • Employee Stock Purchase Plan (ESPP) • Education Reimbursement (related field) • Employee Referral Program and Recognition Program • Paid Holidays and 15 Paid Time-Off Days annually Job Description: Essential Duties and Responsibilities: - Build landing gear assemblies - Read and interpret Maintenance Manuals - Use Precision Tooling - Communicate and work with other departments - Prepare completed assemblies for crating and shipping - Document work performed - Abide by all quality and safety procedures at all times - Follow instructions per the component maintenance manuals(CMM) - Maintain an organized work space - May occasionally be required to work overtime including evenings or weekends as necessary to meet deadlines Education and Experience: - Minimum of two (2) years of previous mechanical maintenance experience. (Preferred: Previous aircraft
---
TITLE: Claims Handler – Motor
EMPLOYER: ClaimSorted
LOCATION: UK (Remote) | Ireland (Remote) (remote)
SALARY: Not disclosed
POSTED: 2026-06-10
APPLY_URL: https://jobs.ashbyhq.com/claimsorted/5d1674aa-7373-4f85-bea0-784379ad696e
EXCERPT: Claims Handler – Motor UK (Remote) | Ireland (Remote) READY TO GROW YOUR CLAIMS CAREER FASTER THAN THE TRADITIONAL INDUSTRY ALLOWS? We're looking for a Motor Claims Handler to join ClaimSorted. This role is ideal for: - a Claims Handler who wants to build their career at a company that rewards performance, not tenure - someone with 3+ years of claims experience who is hungry to learn and grow fast We are not looking for tenure for the sake of it. We are looking for people with talent, ambition, work ethic, and the drive to build a real career. ABOUT CLAIMSORTED ClaimSorted is a Third-Party Administrator (TPA) that manages insurance claims end to end on behalf of insurers, in a ~$200B industry. We combine a high-performing claims team with an AI-enabled platform to deliver claims up to 3x faster, with better service and better economics for insurers. We're backed by Y Combinator, Atomico, and Eurazeo, have raised $16M+, and already manage claims for 30+ insurers across more than $200M in insurance premiums. WHAT YOU'LL DO - Handle claims end to end: from first notification of loss through to settlement - Communicate with policyholders throughout the claims journey, ensuring a clear and positive experience - Review documentation, verify coverage, and assess liability accurately - Set appropriate reserves and manage claims within your authority - Identify potential fraud indicators and escalate appropriately - Maintain accurate and thorough claims records for audit and compliance - Contribute to continuous improvement by flagging process inefficiencies
---
TITLE: Thermography & Motor Circuit Analysis Technician
EMPLOYER: Curtiss-Wright
LOCATION: Client Site - USA - NE - Blair - 650 Industrial Park Dr (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-28
K401_MATCH: yes (not source-backed)
APPLY_URL: https://cw.wd1.myworkdayjobs.com/External/job/Client-Site---USA---NE---Blair---650-Industrial-Park-Dr/Thermography---Motor-Circuit-Analysis-Technician_R321872
EXCERPT: Thermography & Motor Circuit Analysis Technician Client Site - USA - NE - Blair - 650 Industrial Park Dr posted: Posted 15 Days Ago
---
TITLE: Motors Engineering Technician | Motors R&D
EMPLOYER: BETA Technologies INC
LOCATION: South Burlington, Vermont, United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-04
K401_MATCH: yes (not source-backed)
APPLY_URL: https://job-boards.greenhouse.io/betatechnologiesinc/jobs/4211103009
EXCERPT: Motors Engineering Technician | Motors R&D South Burlington, Vermont, United States At BETA Technologies, we apply our intellectual curiosity, passion for aviation, and commitment to sustainability toward a shared mission of revolutionizing electric aviation. Regardless of the position one holds, each team member brings their talent and desire to positively impact the environment and lives of others in a refreshing, vibrant, and inclusive culture. Engineering technicians are critical to the BETA mission, ensuring Electronic Motors (EPU) are designed, built, and tested appropriately to support R&D, flight testing, and other validation needs. As the design develops, engineering technicians will be responsible for rapidly understanding and adjusting to new developments while maintaining quick assembly turnaround. How you will contribute to revolutionizing electric aviation: Hands-on assembly or repair of electric motors and stators including redlining engineering drawings and created build records. Perform testing, validation, troubleshooting, and manufacturing processes in concert with design engineers. Assist editing and implementing technical documentation. Performing in-process quality inspection tasks, feeling comfortable identifying and raising concern about process deviations and being integral part of any troubleshooting efforts to solve them. Maintaining logs and check sheets throughout the build process, which requires proficiency in word processing and spreadsheet software. Develop your expertise concerning electro-mechanical assembly of fully electric propulsion systems. Respect and foster a culture of safety, including working safely around high voltage. Minimum Qualifications: Two-year degree or certificate from an accredited two (2) year college, university, or technical school preferred Ability to Interpret drawings, specifications, and schematics of mechanical
---
TITLE: Salesperson/Store Driver Store 1641
EMPLOYER: Advance Auto Parts Inc
LOCATION: Rochester, New York, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://advanceauto.wd5.myworkdayjobs.com/AdvanceExternalCareers/job/551-Lyell-Ave-Rochester-NY-14606/Salesperson-Store-Driver--Store-1641_R-0500223/apply
EXCERPT: Salesperson/Store Driver Store 1641 Rochester, New York, United States of America Embrace the opportunity to become a Salesperson / Store Driver and deliver exceptional customer service while supporting store operations and automotive parts delivery. If you have a valid driver's license, inventory management skills, and a passion for retail or automotive, this is your opportunity to grow in a dynamic, customer-focused environment.
---
TITLE: Seasonal Laborer (Motor Vehicle Operating)
EMPLOYER: Department of the Interior
LOCATION: Patchogue, New York (unspecified)
SALARY: Not disclosed
POSTED: 2026-04-20
HIRE_STATES: NY
APPLY_URL: https://www.usajobs.gov:443/job/865884500
EXCERPT: Seasonal Laborer (Motor Vehicle Operating) Patchogue, New York Summary These positions are located in Fire Island National Seashore, in the Maintenance Division. The primary purpose of these positions is to perform laboring duties that require moderately heavy physical effort using common hand tools and power equipment. Duties include operating light duty motor vehicles. The typical seasonal entry-on-duty period is Apr-May but can be variable during these months due to weather conditions, project needs, or funding. Anticipated Entry on Duty: May 2026 Duties Operate heavy power equipment and hand and light power tools to maintain buildings, grounds, roads, and trails. Load, unload, and move supplies, materials, furniture, and equipment; perform tasks such as setting signs, painting, landscaping, and litter removal. Perform grounds and maintenance work including trimming vegetation, cleaning and repairing fire pits, and conducting janitorial duties as needed. Conduct basic construction and repair tasks such as digging, grading, breaking pavement, and mixing and pouring concrete or asphalt. Operate light-duty motor vehicles up to 10,000 pounds over various road conditions to transport personnel, materials, and equipment, including towing and performing minor maintenance. Requirements U.S. Citizenship required. Appointment subject to background investigation and favorable adjudication. Meet Selective Service Registration Act requirement for males Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program. You will be required to operate a government (or private) motor vehicle as part of your official duties; a valid driver's license is required. You will be required to submit a Motor Vehicle Operator's License
---
TITLE: Company Car Delivery Driver (5944)
EMPLOYER: Domino's
LOCATION: Indianola, MS, United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.smartrecruiters.com/Dominos/744000131780984-company-car-delivery-driver-5944-
EXCERPT: Company Car Delivery Driver (5944) Indianola, MS, United States Company Description: At AR Pizza, LLC (Domino's Pizza) our people are our greatest asset. We believe that when we invest in our team members, we create better leaders, stronger stores, and exceptional customer experiences. Every role matters, and every team member contributes to our success. We are committed to creating an environment built on respect, accountability, development, and opportunity. We believe our people are capable of excellence. Through training, coaching, and leadership development, we aim to help every team member grow to their best version of themselves. Our customers are the reason we exist. We do not just make pizza - we serve families, support communities, and create experiences. Every order represents trust, and we take that responsibility seriously. We strive to delight every customer through quality products, fast service, and genuine hospitality. At AR Pizza, success starts with our people and ends with satisfied customers. When our team thrives, our customers win - and our communities grow stronger. Job Description: Company Vehicle Delivery Driver Job Description At AR Pizza, LLC, our Delivery Drivers play a key role in creating a positive experience for our customers. As a Company Vehicle Delivery Driver, you will safely deliver orders, provide outstanding customer service, and represent our brand in the community. What You'll Do Deliver customer orders safely and efficiently using a company-provided vehicle. Provide friendly, professional customer service. Assist with food preparation and store operations when not on deliveries. Maintain cleanliness of company
---
TITLE: Mechanical Engineer - Hoods & Outer Body
EMPLOYER: Paccar
LOCATION: Job Country United States | Job State / Province Texas | Job City Denton (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.paccar.com/job/Denton-Mechanical-Engineer-Hoods-&-Outer-Body-TX-76205-7864/1399495633/
EXCERPT: Mechanical Engineer - Hoods & Outer Body Job Country United States | Job State / Province Texas | Job City Denton Company Information PACCAR is a global technology leader in the design, manufacture, and customer support of high-quality light-, medium- and heavy-duty trucks under the Kenworth, Peterbilt and DAF nameplates. PACCAR also designs and manufactures advanced power trains, provides financial services and information technology, and distributes truck parts related to its principal business. Peterbilt Motors Company On highways, construction sites, city streets, logging roads - everywhere our customers earn their living - Peterbilt's red oval is a familiar symbol of performance, reliability, and pride. Peterbilt has reigned as America's premium quality truck manufacturer since the company's founding in 1939. Our dedication to deliver products and services focused on improving customers' performance, image, profitability, and peace of mind truly makes Peterbilt the Class of the Industry. Requisition Summary Peterbilt Motors Company, a PACCAR Company, has an opening for a Mechanical Engineer to add to our Outer Body and Aerodynamics team in Denton, Texas. Scope of work includes concept development, final design development, validation planning, testing support and launching designs into production. Job Responsibilities This position will be working on various projects to include but not limited to: Aesthetic and aerodynamic components (outer body) that promote the image of the Peterbilt and other PACCAR brands. Structural components to mount the outer body components to the truck. Ot
---
TITLE: Maintenance Supervisor TCS
EMPLOYER: Lear Corporation
LOCATION: Job Location (country) Tunisia (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.lear.com/job/Menzel-Bourguiba-Maintenance-Supervisor-TCS-7050/1380543633/
EXCERPT: Maintenance Supervisor TCS Job Location (country) Tunisia Driving the future of automotive. We're Lear For You. Company Overview Lear, a global automotive technology leader in Seating and E-Systems, enables superior in-vehicle experiences for consumers around the world. Our diverse team of more than 165,000 talented employees in 37 countries is driven by a commitment to innovation, operational excellence, and sustainability. Lear is Making every drive better™ by providing the technology for safer, smarter, and more comfortable journeys. Lear, headquartered in Southfield, Michigan, serves every major automaker in the world and ranks #186 on the Fortune 500. Further information about Lear is available at lear.com, or follow us on Twitter @LearCorporation. Lear is embarking on an exciting new chapter with the launch of its second plant and first Greenfield manufacturing facility in Bizerte, Tunisia , part of our Thermal Comfort Systems (TCS) division . This strategic investment marks a significant milestone in Lear's growth and ongoing commitment to innovation. We are seeking dynamic, forward-thinking talents to take on the challenge of launching and shaping this new plant from the ground up. This is a unique opportunity to drive operational excellence, build high-performing teams, and make a lasting impact within a global organization. The Bizerte plant will be at the forefront of thermal comfort innovation, producing advanced technologies that enhance vehicle performance, sustainability, and passenger comfort. Join Lear on this journ
---
TITLE: Senior Engineer, Firmware
EMPLOYER: Raytheon Technologies
LOCATION: GB-SOL-SOLIHULL-003 ~ Fore 3 Huskisson Way ~ GOODRICH CONTROLS HOLDING, Motor Drives (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-12
PARENTAL_LEAVE_WEEKS: 4 (not source-backed)
NON_BIRTH_PARENT_LEAVE_WEEKS: 4 (not source-backed)
K401_MATCH: yes (not source-backed)
APPLY_URL: https://globalhr.wd5.myworkdayjobs.com/REC_RTX_Ext_Gateway/job/GB-SOL-SOLIHULL-003--Fore-3-Huskisson-Way--GOODRICH-CONTROLS-HOLDING-Motor-Drives/Senior-Engineer--Firmware_01821642-1
EXCERPT: Senior Engineer, Firmware GB-SOL-SOLIHULL-003 ~ Fore 3 Huskisson Way ~ GOODRICH CONTROLS HOLDING, Motor Drives posted: Posted 30+ Days Ago
---
TITLE: Senior Buyer
EMPLOYER: Eaton Corporation
LOCATION: Greenwood, South Carolina, USA, 29649 (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://eaton.eightfold.ai/careers/job/687236875487
EXCERPT: Senior Buyer Greenwood, South Carolina, USA, 29649
---
TITLE: Assistant Central Utility Plant Manager
EMPLOYER: DTE Energy
LOCATION: Posting Country (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
APPLY_URL: https://careers.dteenergy.com/job/Dearborn-Assistant-Central-Utility-Plant-Manager-MI-48120/1376598400/
EXCERPT: Assistant Central Utility Plant Manager Posting Country DTE is one of the nation's largest diversified energy companies. Our electric and gas companies have fueled our customer's homes and Michigan's progress for more than a century. And as Michigan's largest source of renewable energy, we're creating a cleaner, healthier environment to power our future. We're also serving communities beyond Michigan, where our affiliated businesses offer renewable energy, emission control technologies, and energy services to industries in 19 states. But we're more than a leading energy company... and working at DTE is more than just a job. At DTE, we take great care of each other and our customers, and we use our energy to be a force for growth and prosperity in our communities. When you join us, you'll be part of a team that welcomes, recognizes, and celebrates differences, and values everyone's health, safety, and wellbeing. Are you ready to make that kind of difference? Bring your energy to DTE. Together, we can achieve great things. Job Summary Location: Dearborn, MI This position is responsible for overseeing, managing, and directing the day-to-day operation and maintenance activities for utility and energy-related assets located within the Central Energy Plant (CEP) located at Ford's Research and Engineering campus. These assets are needed to supply Steam, Hot Water, Chilled Water, and Electrical Distribution to the campus, and supply electricity to the grid. The position will also lead field service engineers who are responsible for operat
---
TITLE: Plant Finance Manager
EMPLOYER: Eaton Corporation
LOCATION: Lincoln, Illinois, USA, 62656 (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://eaton.eightfold.ai/careers/job/687237062058
EXCERPT: Plant Finance Manager Lincoln, Illinois, USA, 62656
---
TITLE: Delivery Associate
EMPLOYER: Clutch
LOCATION: Markham, Ontario, Canada (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-08
APPLY_URL: https://job-boards.greenhouse.io/clutch/jobs/6016048004
EXCERPT: Delivery Associate Markham, Ontario, Canada About Clutch: We're on a mission to reinvent the way people buy, sell, and own cars. Are you game? Clutch is Canada's largest online used car retailer, delivering a seamless, hassle-free car buying and selling experience to drivers everywhere. Customers can browse hundreds of cars from the comfort of their home, get the right one delivered to their door, and enjoy peace of mind with our 10-Day Money-Back Guarantee… and that's just the beginning. Named two years in a row to the Globe & Mail's list of the Top Growing Companies in Canada and also awarded spots on Deloitte's Technology Fast 50™ and Fast 500™ lists, we're looking to add curious, hard-working, and driven individuals to our growing team. Headquartered in Toronto, Clutch was founded in 2017 and currently services Ontario, New Brunswick, Nova Scotia, and Prince Edward Island. Clutch is backed by a number of world-class investors, including D1 Capital, Canaan, Real Ventures, BrandProject, and Upper90. To learn more, visit clutch.ca. About the role: Clutch is looking for a Delivery Associate to join our Field Operations team in our new retail location at Markville Mall! You could be a good fit if you are hard working, organized, and driven with a keen attention to detail . In this position, you will play a key role in maximizing Clutch's ability to quickly list newly acquired vehicles our clients have purchased or traded in. What You'll Do: - Conduct pre-trip and post-trip inspections to ensure vehicle
---
TITLE: Buyer
EMPLOYER: Plexus Corp
LOCATION: Penang, Malaysia (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://plexus.eightfold.ai/careers/job/1099537691778
EXCERPT: Buyer Penang, Malaysia
---
TITLE: Skilled Team Member
EMPLOYER: Toyota Motor Corp.
LOCATION: Buffalo, West Virginia, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2025-12-14
APPLY_URL: https://toyota.wd503.myworkdayjobs.com/TMNA/job/Buffalo-West-Virginia/Skilled-Team-Member_10260288/apply
EXCERPT: Skilled Team Member Buffalo, West Virginia, United States of America Join our team as a Multi-Skilled Maintenance Team Member at Toyota Manufacturing, where you will support innovative solutions in a collaborative environment. We value respect for people and offer a comprehensive training program to enhance your skills. Be part of a company that embraces diversity and fosters professional growth.
---
TITLE: Supervisor, Fuel Accounting Billing
EMPLOYER: Pilot Company
LOCATION: Knoxville, TN, United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-10
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.smartrecruiters.com/PilotCompany/744000126139999-supervisor-fuel-accounting-billing
EXCERPT: Supervisor, Fuel Accounting Billing Knoxville, TN, United States Company Description: Pilot Company is an industry-leading network of travel centers with more than 30,000 team members and over 750 retail and fueling locations in 44 states and six Canadian provinces. Our energy and logistics division serves as a top supplier of fuel, employing one of the largest tanker fleets and providing critical services to oil operations in our nation's busiest basins. Pilot Company supports a growing portfolio of brands with expertise in supply chain and retail operations, logistics and transportation, technology and digital innovation, construction, maintenance, human resources, finance, sales and marketing. Founded in 1958 by Jim A. Haslam II and currently led by CEO Adam Wright, our founding values, people-first culture and commitment to giving back remains true to us today. Whether we are serving guests, a fellow team member, or a trucking company, we are dedicated to fueling people and keeping North America moving. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or any other characteristic protected under applicable federal, state, or local law. Military encouraged to apply. Job Description: The Commercial Excellence Billing Supervisor provides tactical leadership oversight of fuel billing processes and the billing team, with a primary focus on daily execution of work, coordination of resources, and resolution of day‑to‑day and mildly complex billing issues. This role is responsible for supervising billing team members, overseeing automated billing processes, and executing established SOX compliance
---
TITLE: MANAGER
EMPLOYER: Department of the Navy
LOCATION: Ford Island, Hawaii (unspecified)
SALARY: $131K-$197K
POSTED: 2026-06-02
HIRE_STATES: HI
APPLY_URL: https://www.usajobs.gov:443/job/871178700
EXCERPT: MANAGER Ford Island, Hawaii Summary You will serve as a MANAGER for the COMMANDING OFFICER, TECHNICAL DIRECTOR, PACIFIC DETACHMENT DEPUTY of NAVUNSEAWARCENDIV KEYPORT WA. Duties You will provide expert knowledge of Navy research, development, test, and evaluation environments and engineering processes, including mission execution across Warfare Centers and fleet support organizations. You will apply advanced modeling, simulation, and data analytics to assess performance of new technologies, evaluate operational effectiveness, and inform engineering investment decisions for future capabilities. You will assess current and projected mission requirements, identify capability gaps, and provide strategic guidance on the future direction of Detachment operations. You will manage complex engineering and technical projects and programs involving multi-disciplinary personnel, remote sites, and diverse technical capabilities. You will serve as a senior liaison with Pacific Theater customers, Warfare Centers, and Division leadership, representing the Detachment in high-level engagements and engaging in customer-driven requirements for and the execution of projects. You will lead and integrate Detachment operations, fostering collaboration, synergy, and mission alignment across multiple technical departments. You will respond effectively to internal and external customer requirements, ensuring timely, high-quality support to fleet and mission partners. You will communicate complex engineering concepts effectively at all levels, including senior Navy leadership, technical experts, and external partners. Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of
---
TITLE: Sale Day Driver - ADESA Auburn
EMPLOYER: Carvana
LOCATION: Auburn, WA (unspecified)
SALARY: $17.5-$18/hr
POSTED: 2026-05-05
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7874063
EXCERPT: Sale Day Driver - ADESA Auburn Auburn, WA Are you a car enthusiast and looking to make some extra money one day a week? This may be the job for you! Pay Range: $17.50-$18 hourly Schedule: One day per week. Tuesdays Only 8:20am - 12:20pm Description: Sale Day Drivers help move the cars through the auction lanes while the car auction is going on! Sale day driving and safety: Drive vehicles across the block following all safety guidelines including but not limited to wearing a seatbelt, placing vehicle in park or neutral when coming to a stop and following the ADESA wedge. Safely move, stage, and park vehicles in the correct lot area. Advise supervisor or lane captain of all breakdowns and maintenance needs immediately Drivers will be trained and must know, practice and ensure that company safety policies and procedures are followed at-all-times. Always operate motor vehicles safely and practice conservative, cautious, and courteous driving habits Immediately report to manager or supervisor anything that occurs which may potentially jeopardize the ability to physically or legally operate a motor vehicle. Immediately report to manager or supervisor all driving related incidents to include traffic citations, warnings, accidents or mechanical problems experienced on either private or public property whether on or off the job Qualifications Must be at least eighteen (18) years of age. Must be qualified to operate a motor vehicle and possess a valid driver's license. Basic computer skills are required. Ability to work outdoors under any type of weather
---
TITLE: Salesperson/Store Driver Store 8844
EMPLOYER: Advance Auto Parts Inc
LOCATION: Farmington Hills, Michigan, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://advanceauto.wd5.myworkdayjobs.com/AdvanceExternalCareers/job/29563-Orchard-Lake-Rd-Farmington-Hills-MI-48334/Salesperson-Store-Driver--Store-8844_R-0511030/apply
EXCERPT: Salesperson/Store Driver Store 8844 Farmington Hills, Michigan, United States of America Join our team as a Salesperson/Store Driver and provide exceptional service to our customers! We are looking for someone with a passion for sales and a basic understanding of automotive systems. If you have strong communication skills and enjoy working in a dynamic environment, apply now!
---
TITLE: Sale Day Driver - ADESA Des Moines
EMPLOYER: Carvana
LOCATION: Grimes, IA (unspecified)
SALARY: Not disclosed
POSTED: 2026-04-06
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7782780
EXCERPT: Sale Day Driver - ADESA Des Moines Grimes, IA Are you a car enthusiast and looking to make some extra money one day a week? This may be the job for you! Schedule: One day per week (TUESDAYS ONLY). 8:00 AM to 12:00 PM. Description: Sale Day Drivers help move the cars through the auction lanes while the car auction is going on! Sale day driving and safety: Drive vehicles across the block following all safety guidelines including but not limited to wearing a seatbelt, placing vehicle in park or neutral when coming to a stop and following the ADESA wedge. Safely move, stage, and park vehicles in the correct lot area. Advise supervisor or lane captain of all breakdowns and maintenance needs immediately Drivers will be trained and must know, practice and ensure that company safety policies and procedures are followed at-all-times. Always operate motor vehicles safely and practice conservative, cautious, and courteous driving habits Immediately report to manager or supervisor anything that occurs which may potentially jeopardize the ability to physically or legally operate a motor vehicle. Immediately report to manager or supervisor all driving related incidents to include traffic citations, warnings, accidents or mechanical problems experienced on either private or public property whether on or off the job Qualifications Must be at least eighteen (18) years of age. Must be qualified to operate a motor vehicle and possess a valid driver's license. Basic computer skills are required. Ability to work outdoors under any type of weather conditions.
---
TITLE: Sale Day Driver - ADESA Moody
EMPLOYER: Carvana
LOCATION: Moody, AL (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-05
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7895195
EXCERPT: Sale Day Driver - ADESA Moody Moody, AL Are you a car enthusiast and looking to make some extra money one day a week? This may be the job for you! Schedule: One day per week (Wednesday) from 8:00 AM to 12:00 PM. Pay Rate: $12/hour Description: Sale Day Drivers help move the cars through the auction lanes while the car auction is going on! Sale day driving and safety: Drive vehicles across the block following all safety guidelines including but not limited to wearing a seatbelt, placing vehicle in park or neutral when coming to a stop and following the ADESA wedge. Safely move, stage, and park vehicles in the correct lot area. Advise supervisor or lane captain of all breakdowns and maintenance needs immediately Drivers will be trained and must know, practice and ensure that company safety policies and procedures are followed at-all-times. Always operate motor vehicles safely and practice conservative, cautious, and courteous driving habits Immediately report to manager or supervisor anything that occurs which may potentially jeopardize the ability to physically or legally operate a motor vehicle. Immediately report to manager or supervisor all driving related incidents to include traffic citations, warnings, accidents or mechanical problems experienced on either private or public property whether on or off the job Qualifications Must be at least eighteen (18) years of age. Must be qualified to operate a motor vehicle and possess a valid driver's license. Basic computer skills are required. Ability to work outdoors under any type of
---
TITLE: MRO Buyer
EMPLOYER: Plexus Corp
LOCATION: Penang, Malaysia (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://plexus.eightfold.ai/careers/job/1099552494141
EXCERPT: MRO Buyer Penang, Malaysia
---
TITLE: Sale Day Driver - ADESA Boise
EMPLOYER: Carvana
LOCATION: Boise, ID (unspecified)
SALARY: Not disclosed
POSTED: 2026-03-31
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7769474
EXCERPT: Sale Day Driver - ADESA Boise Boise, ID Are you a car enthusiast and looking to make some extra money one day a week? This may be the job for you! Schedule: One day per week. THURSDAYS ONLY from approx. 9:00 AM to 1:00 PM. Pay Rate: $15.50/hour Description: Sale Day Drivers help move the cars through the auction lanes while the car auction is going on! Sale day driving and safety: Drive vehicles across the block following all safety guidelines including but not limited to wearing a seatbelt, placing vehicle in park or neutral when coming to a stop and following the ADESA wedge. Safely move, stage, and park vehicles in the correct lot area. Advise supervisor or lane captain of all breakdowns and maintenance needs immediately Drivers will be trained and must know, practice and ensure that company safety policies and procedures are followed at-all-times. Always operate motor vehicles safely and practice conservative, cautious, and courteous driving habits Immediately report to manager or supervisor anything that occurs which may potentially jeopardize the ability to physically or legally operate a motor vehicle. Immediately report to manager or supervisor all driving related incidents to include traffic citations, warnings, accidents or mechanical problems experienced on either private or public property whether on or off the job Qualifications Must be at least eighteen (18) years of age. Must be qualified to operate a motor vehicle and possess a valid driver's license. Basic computer skills are required. Ability to work outdoors under any
---
TITLE: Reconditioning Manager - Sacramento
EMPLOYER: Carvana
LOCATION: Sacramento (unspecified)
SALARY: $82K-$100K
POSTED: 2026-03-16
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7724041
EXCERPT: Reconditioning Manager - Sacramento Sacramento About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our car's are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: Compensation Range: $82,000-100,000 This is a supervisory position in an Inspection Center overseeing a team carrying out daily operations within a Carvana Inspection Center.. The Reconditioning Manager oversees all aspects of the vehicle reconditioning process and directs at least five leads and up to 70 front line associates in a lean manufacturing environment. This role will be responsible for maintaining a culture of continuous improvement and high associate engagement while meeting quality, production, and cost objectives. This position is not eligible for visa sponsorship. What you'll be doing: Oversee day-to-day operations within the Inspection Center. Provide mentoring and accountability
---
TITLE: Auction Driver - ADESA Barnhart
EMPLOYER: Carvana
LOCATION: Barnhart, MO (unspecified)
SALARY: Not disclosed
POSTED: 2026-04-28
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7862966
EXCERPT: Auction Driver - ADESA Barnhart Barnhart, MO Are you a car enthusiast and looking to make some extra money one day a week? This may be the job for you! Hourly Pay: $15/hour Schedule: One day per week. Every WEDNESDAY ONLY approximately 8:00 AM to 12:00 PM . Description: Sale Day Drivers help move the cars through the auction lanes while the car auction is going on! Sale day driving and safety: Drive vehicles across the block following all safety guidelines including but not limited to wearing a seatbelt, placing vehicle in park or neutral when coming to a stop and following the ADESA wedge. Safely move, stage, and park vehicles in the correct lot area. Advise supervisor or lane captain of all breakdowns and maintenance needs immediately Drivers will be trained and must know, practice and ensure that company safety policies and procedures are followed at-all-times. Always operate motor vehicles safely and practice conservative, cautious, and courteous driving habits Immediately report to manager or supervisor anything that occurs which may potentially jeopardize the ability to physically or legally operate a motor vehicle. Immediately report to manager or supervisor all driving related incidents to include traffic citations, warnings, accidents or mechanical problems experienced on either private or public property whether on or off the job Qualifications Must be at least eighteen (18) years of age. Must be qualified to operate a motor vehicle and possess a valid driver's license. Basic computer skills are required. Ability to work outdoors under any
---
TITLE: Doradca Klienta (m/k/n) Tommy Hilfiger Poznań Factory Outlet (pełny etat)
EMPLOYER: PVH Corp.
LOCATION: Tommy Hilfiger Luboń (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-09
K401_MATCH: yes (not source-backed)
APPLY_URL: https://pvh.wd1.myworkdayjobs.com/PVH_Careers/job/Tommy-Hilfiger-Lubo/Doradca-klienta--peny-etat--Pozna-Factory-Outlet-Tommy-Hilfiger--m-f-d-_R28412
EXCERPT: Doradca Klienta (m/k/n) Tommy Hilfiger Poznań Factory Outlet (pełny etat) Tommy Hilfiger Luboń posted: Posted 3 Days Ago
---
TITLE: Sale Day Driver - ADESA Sarasota
EMPLOYER: Carvana
LOCATION: Bradenton, FL (unspecified)
SALARY: Not disclosed
POSTED: 2026-04-14
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7815848
EXCERPT: Sale Day Driver - ADESA Sarasota Bradenton, FL Are you a car enthusiast and looking to make some extra money one day a week? This may be the job for you! Schedule: One day per week. FRIDAYS from approximately 8:00 AM to 12:00 PM. Pay Rate: $15/hour Description: Sale Day Drivers help move the cars through the auction lanes while the car auction is going on! Sale day driving and safety: Drive vehicles across the block following all safety guidelines including but not limited to wearing a seatbelt, placing vehicle in park or neutral when coming to a stop and following the ADESA wedge. Safely move, stage, and park vehicles in the correct lot area. Advise supervisor or lane captain of all breakdowns and maintenance needs immediately Drivers will be trained and must know, practice and ensure that company safety policies and procedures are followed at-all-times. Always operate motor vehicles safely and practice conservative, cautious, and courteous driving habits Immediately report to manager or supervisor anything that occurs which may potentially jeopardize the ability to physically or legally operate a motor vehicle. Immediately report to manager or supervisor all driving related incidents to include traffic citations, warnings, accidents or mechanical problems experienced on either private or public property whether on or off the job Qualifications Must be at least eighteen (18) years of age. Must be qualified to operate a motor vehicle and possess a valid driver's license. Basic computer skills are required. Ability to work outdoors under any type
---
TITLE: Automotive Sales Manager
EMPLOYER: Hertz Global Hldgs INC
LOCATION: Warminster, PA, United States (unspecified)
SALARY: $44K-$94K
POSTED: 2026-03-23
K401_MATCH: yes (not source-backed)
ADOPTION_ASSISTANCE_OFFERED: yes (not source-backed)
MENTAL_HEALTH_SUPPORT: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://fa-evlf-saasfaprod1.fa.ocs.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_1/job/38059
EXCERPT: Automotive Sales Manager Warminster, PA, United States A Day in the Life: Manage retail business including sales process, finance, and sales team. Assist in the management of all other store processes as needed and support omni-channel sales. Wage: Base salary plus sales based commissions averaging per year $94,209, specifically $43,888/year + anticipated average commissions of $50,321/yr What You'll Do: Sales Meet and exceed sales targets Manage and lead the sales team Including scheduling, interviewing, hiring, and performance management Drive strong CRM metric accountability Achieve KPI targets Support Digital Retailing initiatives, including Rent2Buy Finance Ensure completion of Finance deal packages Promptly follow up on all missing documents and pending deals Work with Sales Consultants on finance processing and metrics Support the Finance and Insurance process and performance Store Management Achieve high customer service score (NPS) Train Sales Staff in customer interaction and processes Oversee store management as the second highest employee at location Support inventory and reconditioning processes Pricing of cars as needed Support omni-channel sales Monitor Store and ICC (Internal Audit Checklist) compliance Manage employee, consumer and vendor issues as needed Including concerns and complaints with Car Sales Leadership and HR What We're Looking For: 3 years' experience in Car Sales Experience in auto dealership or auto financing preferred 1 year of management experience Must have a valid driver's license High school diploma or equivalent experience in car sales management Ability to collaborate with internal and external stakeholders across multiple functions and locations Ability to influence Flexible and adaptable; ability
---
TITLE: Oil Change Team Member - Shop#481 - 50 Viking Drive
EMPLOYER: Driven Brands Holdings Inc
LOCATION: Reedsburg, Wisconsin, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-03-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://wd1.myworkdaysite.com/recruiting/drivenbrands/DrivenBrandsCareerSite/job/50-Viking-Drive-Reedsburg-WI-53959/Lube-Technician_JR104348-1/apply
EXCERPT: Oil Change Team Member - Shop#481 - 50 Viking Drive Reedsburg, Wisconsin, United States of America Embrace the role of Take 5 Oil Change as an Oil Change Team Member! No experience needed-get paid training to perform oil changes, light maintenance, and deliver top-notch customer service. Enjoy flexible schedules, growth opportunities, and great benefits. Join a friendly, fast-paced team and start your journey in automotive services today!
---
TITLE: Finance & Insurance Manager - Chevrolet Greenacres
EMPLOYER: AutoNation
LOCATION: Greenacres, Florida, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-04-16
K401_MATCH: yes (not source-backed)
APPLY_URL: https://autonation.wd5.myworkdayjobs.com/Careers/job/AutoNation-Chevrolet-Greenacres/Finance---Insurance-Manager---Chevrolet-Greenacres_JR2026140276/apply
EXCERPT: Finance & Insurance Manager - Chevrolet Greenacres Greenacres, Florida, United States of America Embrace the role of a Finance & Insurance Manager and lead the future of automotive retail. Drive customer satisfaction by providing expert credit decisions, compliance, and financial solutions. Shape innovative deals, build strong relationships, and ensure a seamless experience for every customer. Grow your career with a Fortune 200 leader in the automotive industry.
---
TITLE: Journeyman Electrician
EMPLOYER: Distro
LOCATION: Fort Collins, Colorado (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-02
APPLY_URL: https://jobs.lever.co/distro/68d79f16-a530-4b6b-bdb7-3445d2f95795
EXCERPT: Journeyman Electrician Fort Collins, Colorado Position Summary This position is a component of the Electrical and Instrumentation Division of BLS Electrical (BLSE) and reports directly to the Crew Foreman. Incumbent will provide a full range of responsibilities that include but are not limited to installing, maintaining, and repairing electrical systems in a construction environment. Continually participate in ongoing efforts to enhance customer satisfaction, company profit, and personal job mastery. All jobs shall be conducted in a safe, efficient, and professional manner. Essential Duties and Responsibilities Define and oversee project scope and deliverables while managing the constraints. Create clear and attainable project objectives and directly oversee project quality. Plan, execute, and finalize projects according to contractual agreements and within budget. Plan and schedule project timelines and milestones. Ensure the implementation, communication, and endorsement of the health and safety policy. Inspect and review projects to monitor compliance with building and safety codes, and other applicable regulations. Always demonstrate a high personal example of health and safety standards in all places. Be familiar with the provisions of the OSHA and MSHA Health and Safety Acts, federal and state regulations as they apply to work areas under your control. Mentor Apprentices from beginning to end of assignment to ensure quality work and facilitate learning. Use appropriate hand tools, power tools, and testing equipment to properly complete a job. Install, connect, test, and maintain electrical systems. Troubleshoot electrical motors, motor controls, VFDs, and motor starters/contactors. Follow basic wiring diagrams for troubleshooting and installation purposes. Learn
---
TITLE: Senior/Staff Motor Manufacturing Engineer
EMPLOYER: Joby Aviation Inc
LOCATION: San Carlos, CA, US (unspecified)
SALARY: $120K-$206K
POSTED: 2026-06-10
APPLY_URL: https://careers-jobyaviation.icims.com/jobs/5047/senior-staff-motor-manufacturing-engineer/job
EXCERPT: Senior/Staff Motor Manufacturing Engineer San Carlos, CA, US Company Overview Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service. Overview Joby Aviation is seeking a passionate Senior/Staff Manufacturing Engineer to join our Electric Propulsion Manufacturing Engineering Team in San Carlos, CA. The Senior/Staff Manufacturing Engineer will​ lead new product introduction and ramp-up of Joby aircraft powertrain through implementation of manufacturing equipment and new processes, and working closely with cross-functional teams. This individual must be highly organized and self-driven while possessing a deep understanding of manufacturing scale-up, mechanical & electrical fundamentals, equipment and quality systems. This position is exciting and rewarding, as the Senior Manufacturing Engineer will promptly see their ideas influence many key areas due to the fast pace of Joby Aviation. Responsibilities Partner with Design, Quality, Test, and Equipment Engineering to develop world-class motor manufacturing processes, driving higher quality, quantity, and on-time equipment readiness at every build
---
TITLE: Motor Vehicle Operator
EMPLOYER: Department of Defense
LOCATION: Pentagon, Arlington, Virginia (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-08
HIRE_STATES: VA
APPLY_URL: https://www.usajobs.gov:443/job/872063700
EXCERPT: Motor Vehicle Operator Pentagon, Arlington, Virginia Summary Under the guidance and leadership of the Director, Pentagon Services Division (PSD), Executive Services Directorate (ESD), Washington Headquarters Services (WHS) and direct supervision of the Pentagon Motor Pool (PMP) Leaders, provides Official Motor Transportation for the PMP. Operates a U.S. Government leased passenger-carrying gasoline or diesel vehicle throughout the National Capitol Region (NCR) for Department of Defense personnel. Duties Incumbents typical work assignments may include the following: Operate panel trucks, carryalls, handicap van and 15 - 36 passenger buses. Drive a 15 to 36 passenger bus or similar vehicle with either manual (standard) or automatic transmission. Support special events such as Ceremonial Bus Transportation Support for the Secretary of Defense, the Joint Chiefs of Staff and high-ranking officials with the Department of Defense. Provide special transportation for the Medal of Honor ceremonies, that are usually conducted at the Pentagon or the White House which may require overtime. Receive the Motor Equipment Utilization Record and verifies information such as authorization signature and correct vehicle registration number. Operating a vehicle over predetermined routes and arrives/departs from pick-up points and discharge points at scheduled times. Checking authorized passes on all passengers before allowing them to enter the van or bus. Education Education cannot be substituted for experience. Evaluation Category Rating: Once the announcement has closed, a review of your résumé and supporting documentation will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and
---
TITLE: Truck Driver
EMPLOYER: Grocery Outlet Holding Corp
LOCATION: Sacramento Warehouse (unspecified)
SALARY: Not disclosed
POSTED: 2026-03-11
APPLY_URL: https://recruiting.ultipro.com/GRO1006/JobBoard/4c6ab91f-73c0-bb4f-ad81-094171fac4c7/OpportunityDetail?opportunityId=264943f8-d63e-4caa-95fb-a55dd7f411c7
EXCERPT: Truck Driver Sacramento Warehouse The Transportation Driver is responsible for the safe, efficient, and compliant transportation of products over designated routes. This role requires strict adherence to all Department of Transportation (DOT) Federal Motor Carrier Safety Administration (FMCSA) regulations and company safety policies. Drivers provide essential support to warehousing operations by ensuring the safe operation of vehicles and the proper loading and unloading of orders. This role reports to the Manager - Transportation.
---
TITLE: Salesperson/Store Driver Store 7171
EMPLOYER: Advance Auto Parts Inc
LOCATION: Monroeville, Pennsylvania, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://advanceauto.wd5.myworkdayjobs.com/AdvanceExternalCareers/job/3801-William-Penn-Hwy-Monroeville-PA-15146/Salesperson-Store-Driver--Store-7171_R-0507563/apply
EXCERPT: Salesperson/Store Driver Store 7171 Monroeville, Pennsylvania, United States of America Join our team as a Salesperson/Store Driver and provide exceptional customer service while achieving sales goals. If you have a passion for automotive parts and enjoy working in a dynamic environment, we want to hear from you!
---
TITLE: Skilled Equipment Maintenance Technician
EMPLOYER: Toyota Motor Corp.
LOCATION: Troy, Missouri, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-11
APPLY_URL: https://toyota.wd503.myworkdayjobs.com/TMNA/job/Troy-Missouri/Skilled-Equipment-Maintenance-Technician_10329057/apply
EXCERPT: Skilled Equipment Maintenance Technician Troy, Missouri, United States of America Embrace the role of a Skilled Equipment Maintenance Technician at Toyota Manufacturing! Use your expertise in equipment maintenance, troubleshooting, and industrial automation to keep our production running smoothly. Enjoy competitive pay, growth opportunities, and a supportive work environment. Ready to make an impact in a leading manufacturing company? Apply today!
---
TITLE: Stellantis Certified Expert (Phase 3) – $10,000 Bonus
EMPLOYER: Carvana
LOCATION: Dallas, TX (unspecified)
SALARY: Not disclosed
POSTED: 2026-03-30
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7766584
EXCERPT: Stellantis Certified Expert (Phase 3) – $10,000 Bonus Dallas, TX We are looking for Stellantis Phase 3 Certified Technician , and we're ready to invest in your expertise from Day 1. $10,000 Sign-On Bonus: Fully certified Phase 3 Techs receive a $10k payout structured over your first 6 months Market-Leading Pay: Competitive flat-rate pay + guaranteed hours Elite Shop Culture: Work with a team that respects your diagnostic skills and provides the volume you need to turn hours About Carvana At Carvana, we sell cars-but we're not car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own mom. Period. That's why every vehicle goes through Carvana's process, where it's inspected, perfected, and prepared to meet our high standards before it ever reaches you. And now, we're bringing those same values to our new car dealerships-delivering quality, trust, and care you'd be proud to share with Mom. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Carvana Chrysler Dodge Jeep Ram of Dallas Texas is a factory-authorized Stellantis dealership adding an experienced Tech III to our shop. We are a full-service repair facility performing engine, transmission, diesel, drivability, warranty and
---
TITLE: Forklift Operator - Night Shift
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://jobs.xpo.com/job/Marshfield-Forklift-Operator-Night-Shift-MO-65706/1382764100/
EXCERPT: Forklift Operator - Night Shift Country US What you'll need to succeed as a Forklift Operator at XPO Get a feel for the role. Watch this short video to see a day-in-the-life on an XPO dock . Minimum qualifications: Be at least 18 years of age Able to do basic math calculations, with and without a calculator Available to work a variety of shifts due to varying freight volumes, including days, evenings, nights and weekends Preferred qualifications: Dock or warehouse experience in the transportation industry Forklift experience in a freight or less-than-truckload (LTL) environment Experience loading and unloading trailers Strong attention to detail and desire to succeed About the Forklift Operator job Pay, benefits and more: Pay start s at $22.85/hour Shift: Night Full health insurance benefits are available on day one Life and disability insurance Earn up to 13 days of PTO over your first year 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Efficiently sort, handle, load and unload palletized and non-palletized freight Use appropriate motorized and manual equipment, including pallet jack and forklift Secure freight inside trailers using appropriate tools and supplies Work in a safe, efficient manner, adhering to company safety policies Use mobile handheld devices to scan and track shipments Work on a dock that is not climate-controlled for extended periods Forklift Operators are required to: Lift freight and other
---
TITLE: Forklift Operator
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: $22.85-$28.1/hr
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://jobs.xpo.com/job/Salem-Forklift-Operator-IL-62881/1374421800/
EXCERPT: Forklift Operator Country US What you'll need to succeed as a Forklift Operator at XPO Get a feel for the role. Watch this short video to see a day-in-the-life on an XPO dock . Minimum qualifications: Be at least 18 years of age Able to do basic math calculations, with and without a calculator Available to work a variety of shifts due to varying freight volumes, including days, evenings, nights and weekends. Preferred qualifications: Dock or warehouse experience in the transportation industry Forklift experience in a freight or less-than-truckload (LTL) environment Experience loading and unloading trailers Strong attention to detail and desire to succeed About the Forklift Operator job Pay, benefits and more: Expected pay range: $22.85 to $28.10 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Additional $1.80/hour shift premium for nights FAC Shift Full health insurance benefits are available on day one Life and disability insurance Earn up to 13 days of PTO over your first year 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Efficiently sort, handle, load and unload palletized and non-palletized freight Use appropriate motorized and manual equipment, including pallet jack and forklift Secure freight inside trailers using appropriate tools and supplies Work in a safe, efficient manner, adhering to company safety policies U
---
TITLE: Assembly & Test Engineer
EMPLOYER: Rolls-Royce Holdings
LOCATION: West Lafayette (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-09
APPLY_URL: https://rollsroyce.wd3.myworkdayjobs.com/professional/job/West-Lafayette/Assembly---Test-Engineer_JR6154764-1
EXCERPT: Assembly & Test Engineer West Lafayette posted: Posted 3 Days Ago
---
TITLE: Mechanical Engineer- Battery Electric Vehicle
EMPLOYER: Paccar
LOCATION: Job Country United States | Job State / Province Texas | Job City Denton (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.paccar.com/job/Denton-Mechanical-Engineer-Battery-Electric-Vehicle-TX-76205-7864/1399505133/
EXCERPT: Mechanical Engineer- Battery Electric Vehicle Job Country United States | Job State / Province Texas | Job City Denton Company Information PACCAR is a Fortune 500 company established in 1905. PACCAR Inc is recognized as a global leader in the commercial vehicle, financial, and customer service fields with internationally recognized brands such as Kenworth, Peterbilt, and DAF Trucks. PACCAR is a global technology leader in the design, manufacture and customer support of high-quality light-, medium- and heavy-duty trucks under the Kenworth, Peterbilt and DAF nameplates. PACCAR also designs and manufactures advanced power trains, provides financial services and information technology, and distributes truck parts related to its principal business. Peterbilt Motors Company On highways, construction sites, city streets, logging roads - everywhere our customers earn their living - Peterbilt's red oval is a familiar symbol of performance, reliability and pride. Peterbilt has reigned as America's premium quality truck manufacturer since the company's founding in 1939. Our dedication to deliver products and services focused on improving customers' performance, image, profitability and peace of mind truly makes Peterbilt the Class of the Industry. This position is based at the Peterbilt Manufacturing Plant in Denton, Texas. In Denton, we have manufactured, supported, and distributed over 1 million trucks since 1980. Our employees take great pride in our products. We are recognized as a premier employer and valued partner in the local community. Requisition Summary Do you want to help shape Peterbilt's f
---
TITLE: Dockworker (Hostler)
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: $26.36-$31.97/hr
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://jobs.xpo.com/job/Baltimore-Dockworker-%28Hostler%29-MD-21237/1385858600/
EXCERPT: Dockworker (Hostler) Country US What you'll need to succeed as a Dockworker (Hostler) at XPO Minimum qualifications: Be at least 18 years of age A valid driver's license Able to do basic math calculations, with and without a calculator To pass a company-paid, post-offer, pre-hire (physical essential functions) test Available to work a variety of shifts due to varying freight volumes, including days, evenings, nights and weekends Preferred qualifications: Tractor/trailer experience (3 axle tractor, 53' trailer) Dock/warehouse experience in the transportation industry Forklift experience in a freight/less-than-truckload environment Experience loading and unloading trailers Basic written and verbal communication skills Desire to succeed with strong attention to detail About the Dockworker (Hostler) job Pay, benefits and more: Expected pay range: $ 26.36 to $ 31.97 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Full health insurance on day one Life and disability insurance Earn up to 13 days PTO over your first year 9 paid company holidays 401(k) option with company match Employee stock purchase plan Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Move trailers throughout the property Use appropriate motorized and manual equipment, including pallet jack and forklift Efficiently load freight a minimum of 1 day per week Operate a hostler in all types of weather; safely walk and stand fo
---
TITLE: Part-Time Oil Change Team Member - Shop#224 - 76 Reynoldsburg - New Albany Road
EMPLOYER: Driven Brands Holdings Inc
LOCATION: Blacklick, Ohio, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-03-05
K401_MATCH: yes (not source-backed)
APPLY_URL: https://wd1.myworkdaysite.com/recruiting/drivenbrands/DrivenBrandsCareerSite/job/76-Reynoldsburg-New-Albany-Road-Blacklick-OH-43004/Part-Time-Oil-Change-Team-Member_JR104769-1/apply
EXCERPT: Part-Time Oil Change Team Member - Shop#224 - 76 Reynoldsburg - New Albany Road Blacklick, Ohio, United States of America Embrace the role of Take 5 Oil Change as a Part-Time Oil Change Team Member! No experience required-get paid training to perform oil changes, light maintenance, and deliver top-notch customer service. Enjoy flexible schedules, growth opportunities, and a supportive team environment. Join us and start your journey in automotive services today!
---
TITLE: Forklift Operator - Afternoon Shift
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://jobs.xpo.com/job/Lordstown-Forklift-Operator-Afternoon-Shift-OH-44481/1396935900/
EXCERPT: Forklift Operator - Afternoon Shift Country US What you'll need to succeed as a Forklift Operator at XPO Get a feel for the role. Watch this short video to see a day-in-the-life on an XPO dock. Minimum qualifications: Be at least 18 years of age Able to do basic math calculations, with and without a calculator Available to work a variety of shifts due to varying freight volumes, including days, evenings, nights and weekends Preferred qualifications: Dock or warehouse experience in the transportation industry Forklift experience in a freight or less-than-truckload (LTL) environment Experience loading and unloading trailers Strong attention to detail and desire to succeed About the Forklift Operator job Pay, benefits and more: Pay starts at $22.85/hour Afternoon Shift Full health insurance benefits are available on day one Life and disability insurance Earn up to 13 days of PTO over your first year 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Efficiently sort, handle, load and unload palletized and non-palletized freight Use appropriate motorized and manual equipment, including pallet jack and forklift Secure freight inside trailers using appropriate tools and supplies Work in a safe, efficient manner, adhering to company safety policies Use mobile handheld devices to scan and track shipments Work on a dock that is not climate-controlled for extended periods Forklift Operators are required to: Lift freight and other
---
TITLE: Staff Test Engineer - NVH
EMPLOYER: Harley-Davidson
LOCATION: Wauwatosa, WI (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
APPLY_URL: https://jobs.harley-davidson.com/job/Wauwatosa-Staff-Test-Engineer-NVH-WI-53208/1373698300/
EXCERPT: Staff Test Engineer - NVH Wauwatosa, WI Auto req ID: 51407 Title: Job Function: Job Category Engineering Location: Workplace Category: Company: Full or Part-Time: Shift: At Harley-Davidson, we are building more than machines. It's our passion and commitment to continue the evolution of this storied brand, and heighten the desirability of the Harley-Davidson experience. To keep building our legend and leading our industry through innovation, evolution, and emotion we need the best and brightest talent. We stand for the timeless pursuit of adventure. Freedom for the soul. Are you ready to join us? The Harley-Davidson Motor Company Product Development Center (PDC) located in Wauwatosa, WI is home to the mantra - You dream it. We build it. Join our team as a. Job Summary Demonstrates specialized depth and / or breadth of expertise in training and mentoring team members in the use of test lab equipment control systems in support of product and systems engineering, advanced innovation, long term technology development and quality initiatives within Product Development Engineering. Impacts the achievement of various regulatory testing that enables Harley-Davidson Motor Company to support the world-wide availability of its products. Job Responsibilities Resolves complex problems involving test criteria, test standards, application of test methods and analysis of test results. Deep expertise in ability to analyze, compile, and report quality test results to engineering in a timely manner. Develops new techniques using state
---
TITLE: Doradca Klienta (m/k/n) Tommy Hilfiger Modlniczka Factory Outlet (pełny etat)
EMPLOYER: PVH Corp.
LOCATION: Tommy Hilfiger Modlniczka k.Krakowa (Outlet) (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-19
K401_MATCH: yes (not source-backed)
APPLY_URL: https://pvh.wd1.myworkdayjobs.com/PVH_Careers/job/Tommy-Hilfiger-Modlniczka-kKrakowa-Outlet/Doradca-klienta--peny-etat--Tommy-Hilfiger-Modlniczka-Factory-Outlet--m-f-d-_R28062
EXCERPT: Doradca Klienta (m/k/n) Tommy Hilfiger Modlniczka Factory Outlet (pełny etat) Tommy Hilfiger Modlniczka k.Krakowa (Outlet) posted: Posted 24 Days Ago
---
TITLE: Dockworker (Hostler) - Day Shift
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://jobs.xpo.com/job/Grand-Rapids-Dockworker-%28Hostler%29-Day-Shift-MI-49512/1379375000/
EXCERPT: Dockworker (Hostler) - Day Shift Country US What you'll need to succeed as a Dockworker (Hostler) at XPO Minimum qualifications: Be at least 18 years of age A valid driver's license Able to do basic math calculations, with and without a calculator To pass a company-paid, post-offer, pre-hire (physical essential functions) test Available to work a variety of shifts due to varying freight volumes, including days, evenings, nights and weekends Preferred qualifications: Tractor/trailer experience (3 axle tractor, 53' trailer) Dock/warehouse experience in the transportation industry Forklift experience in a freight/less-than-truckload environment Experience loading and unloading trailers Basic written and verbal communication skills Desire to succeed with strong attention to detail About the Dockworker (Hostler) job Pay, benefits and more: Pay starts at $ 24.83 /hour Full health insurance on day one Life and disability insurance Earn up to 13 days PTO over your first year 9 paid company holidays 401(k) option with company match Employee stock purchase plan Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Move trailers throughout the property Use appropriate motorized and manual equipment, including pallet jack and forklift Efficiently load freight a minimum of 1 day per week Operate a hostler in all types of weather; safely walk and stand for extended periods Safely operate heavy equipment, including moving, positioning and connecting/disconnecting a converter dolly with an a
---
TITLE: Account Manager - Aviation Distribution
EMPLOYER: Eastman Chemical Company
LOCATION: Primary Background Country United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.eastman.com/job/Linden-Account-Manager-Aviation-Distribution-NJ-07036/1392642900/
EXCERPT: Account Manager - Aviation Distribution Primary Background Country United States Founded in 1920, Eastman is a global specialty materials company that produces a broad range of products found in items people use every day. With the purpose of enhancing the quality of life in a material way, Eastman works with customers to deliver innovative products and solutions while maintaining a commitment to safety and sustainability. The company's innovation-driven growth model takes advantage of world-class technology platforms, deep customer engagement, and differentiated application development to grow its leading positions in attractive end markets such as transportation, building and construction, and consumables. As a globally inclusive company, Eastman employs approximately 13,000 people around the world and serves customers in more than 100 countries. The company had 2025 revenue of approximately $8.8 billion and is headquartered in Kingsport, Tennessee, USA. For more information, visit www.eastman.com . Role Profile The Account Manager is responsible for executing our business strategy at the customer level by enabling customer success and optimizing volume, revenue, and value-add growth for Eastman. To effectively accomplish this, the Account Manager must prioritize efforts across their territory, generate demand through discovery to uncover unmet needs, articulate compelling customer value propositions and develop account strategies which align with our business strategies. Approximately 50% travel is required for this role. This is a U.S. based role. Res
---
TITLE: Dockworker (Hostler) - Night Shift
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: $30K-$30K
POSTED: 2026-06-12
APPLY_URL: https://jobs.xpo.com/job/Whites-Creek-Dockworker-%28Hostler%29-Night-Shift-TN-37209/1397361800/
EXCERPT: Dockworker (Hostler) - Night Shift Country US What you'll need to succeed as a Dockworker (Hostler) at XPO Minimum qualifications: Be at least 18 years of age A valid driver's license Able to do basic math calculations, with and without a calculator To pass a company-paid, post-offer, pre-hire (physical essential functions) test Available to work a flexible schedule that's up to 12-14 hours a day, including days, evenings, overnights, weekends, and holidays Preferred qualifications: Tractor/trailer experience (3 axle tractor, 53' trailer) Dock/warehouse experience in the transportation industry Forklift experience in a freight/less-than-truckload environment Experience loading and unloading trailers Basic written and verbal communication skills Desire to succeed with strong attention to detail About the Dockworker (Hostler) job Pay, benefits and more: Experienced forklift operators can start at $30.85/hour Full health insurance on day one Life and disability insurance Earn up to 13 days PTO over your first year 9 paid company holidays 401(k) option with company match Employee stock purchase plan Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Move trailers throughout the property Use appropriate motorized and manual equipment, including pallet jack and forklift Efficiently load freight a minimum of 1 day per week Operate a hostler in all types of weather; safely walk and stand for extended periods Safely operate heavy equipment, including moving, positioning and connectin
---
TITLE: Assembler MFG Production (turno 1)
EMPLOYER: Eaton Corporation
LOCATION: SANTIAGO DE LOS CABALLEROSQ, DOM (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://eaton.eightfold.ai/careers/job/687236518499
EXCERPT: Assembler MFG Production (turno 1) SANTIAGO DE LOS CABALLEROSQ, DOM
---
TITLE: Dealership Administrative Coordinator
EMPLOYER: Avis Budget Group
LOCATION: 617 S Brand Blvd, Glendale, 91204 (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://avisbudget.wd1.myworkdayjobs.com/ABG_Careers/job/617-S-Brand-Blvd-Glendale-91204/Dealership-Administrative-Coordinator_R0180576
EXCERPT: Dealership Administrative Coordinator 617 S Brand Blvd, Glendale, 91204 posted: Posted 30+ Days Ago
---
TITLE: Forklift Operator - Day Shift
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
APPLY_URL: https://jobs.xpo.com/job/Whites-Creek-Forklift-Operator-Day-Shift-TN-37209/1378883400/
EXCERPT: Forklift Operator - Day Shift Country US What you'll need to succeed as a Forklift Operator at XPO Get a feel for the role. Watch this short video to see a day-in-the-life on an XPO dock . Minimum qualifications: Be at least 18 years of age Able to do basic math calculations, with and without a calculator Availability to work a variety of shifts, including days, evenings, overnights, weekends, and holidays. Preferred qualifications: Dock or warehouse experience in the transportation industry Forklift experience in a freight or less-than-truckload (LTL) environment Experience loading and unloading trailers Strong attention to detail and desire to succeed About the Forklift Operator job Pay, benefits and more: Experienced forklift operators can start at $28.81/hour Day Shift Full health insurance benefits are available on day one Life and disability insurance Earn up to 13 days of PTO over your first year 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Efficiently sort, handle, load and unload palletized and non-palletized freight Use appropriate motorized and manual equipment, including pallet jack and forklift Secure freight inside trailers using appropriate tools and supplies Work in a safe, efficient manner, adhering to company safety policies Use mobile handheld devices to scan and track shipments Work on a dock that is not climate-controlled for extended periods Forklift Operators are required to: Lift frei
---
TITLE: Plant Buyer
EMPLOYER: Eaton Corporation
LOCATION: Pyungtaeksi, KOR, 459-040 (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://eaton.eightfold.ai/careers/job/687235525948
EXCERPT: Plant Buyer Pyungtaeksi, KOR, 459-040
---
TITLE: Forklift Operator
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://jobs.xpo.com/job/Whites-Creek-Forklift-Operator-TN-37209/1398017100/
EXCERPT: Forklift Operator Country US What you'll need to succeed as a Forklift Operator at XPO Get a feel for the role. Watch this short video to see a day-in-the-life on an XPO dock . Minimum qualifications: Be at least 18 years of age Able to do basic math calculations, with and without a calculator Availability to work a variety of shifts, including days, evenings, overnights, weekends, and holidays. Preferred qualifications: Dock or warehouse experience in the transportation industry Forklift experience in a freight or less-than-truckload (LTL) environment Experience loading and unloading trailers Strong attention to detail and desire to succeed About the Forklift Operator job Pay, benefits and more: Experienced forklift operators can start at $28.81/hour. Full health insurance benefits are available on day one Life and disability insurance Earn up to 13 days of PTO over your first year 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Efficiently sort, handle, load and unload palletized and non-palletized freight Use appropriate motorized and manual equipment, including pallet jack and forklift Secure freight inside trailers using appropriate tools and supplies Work in a safe, efficient manner, adhering to company safety policies Use mobile handheld devices to scan and track shipments Work on a dock that is not climate-controlled for extended periods Forklift Operators are required to: Lift freight and o
---
TITLE: Foreign Military Sales (FMS) Business Development
EMPLOYER: Noble Corporation PLC
LOCATION: Location not specified (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://apply.workable.com/j/9C1439D80E
EXCERPT: Foreign Military Sales (FMS) Business Development
---
TITLE: Dockworker (Hostler)
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: $24.83-$30.13/hr
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://jobs.xpo.com/job/Columbus-Dockworker-%28Hostler%29-OH-43228/1392335200/
EXCERPT: Dockworker (Hostler) Country US What you'll need to succeed as a Dockworker (Hostler) at XPO Minimum qualifications: Be at least 18 years of age A valid driver's license Able to do basic math calculations, with and without a calculator To pass a company-paid, post-offer, pre-hire (physical essential functions) test Available to work a flexible schedule that's up to 12-14 hours a day, including days, evenings, overnights, weekends, and holidays Preferred qualifications: Tractor/trailer experience (3 axle tractor, 53' trailer) Dock/warehouse experience in the transportation industry Forklift experience in a freight/less-than-truckload environment Experience loading and unloading trailers Basic written and verbal communication skills Desire to succeed with strong attention to detail About the Dockworker (Hostler) job Pay, benefits and more: Expected pay range: $ 24.83 to $ 30.13 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Full health insurance on day one Life and disability insurance Earn up to 13 days PTO over your first year 9 paid company holidays 401(k) option with company match Employee stock purchase plan Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Move trailers throughout the property Use appropriate motorized and manual equipment, including pallet jack and forklift Efficiently load freight a minimum of 1 day per week Operate a hostler in all types of weather; safely wa
---
TITLE: Analyst II, Financial Systems
EMPLOYER: Pilot Company
LOCATION: Knoxville, TN, United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-10
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.smartrecruiters.com/PilotCompany/744000130265004-analyst-ii-financial-systems
EXCERPT: Analyst II, Financial Systems Knoxville, TN, United States Company Description: Pilot Company is an industry-leading network of travel centers with more than 30,000 team members and over 750 retail and fueling locations in 44 states and six Canadian provinces. Our energy and logistics division serves as a top supplier of fuel, employing one of the largest tanker fleets and providing critical services to oil operations in our nation's busiest basins. Pilot Company supports a growing portfolio of brands with expertise in supply chain and retail operations, logistics and transportation, technology and digital innovation, construction, maintenance, human resources, finance, sales and marketing. Founded in 1958 by Jim A. Haslam II and currently led by CEO Adam Wright, our founding values, people-first culture and commitment to giving back remains true to us today. Whether we are serving guests, a fellow team member, or a trucking company, we are dedicated to fueling people and keeping North America moving. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or any other characteristic protected under applicable federal, state, or local law. Military encouraged to apply. Job Description: We are seeking applicants with a local presence in Knoxville, TN or the surrounding communities. This position does not support immigration sponsorship. To be considered you must have the legal right to work in United States without additional sponsorship. Supports Pilot's financial operations by maintaining and enhancing Oracle EPM as the core platform for closeout reporting,
---
TITLE: Forklift Operator
EMPLOYER: XPO, Inc.
LOCATION: Country US (unspecified)
SALARY: $22.85-$28.1/hr
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
LEARNING_BUDGET_OFFERED: yes (not source-backed)
APPLY_URL: https://jobs.xpo.com/job/Columbus-Forklift-Operator-OH-43228/1387044200/
EXCERPT: Forklift Operator Country US What you'll need to succeed as a Forklift Operator at XPO Get a feel for the role. Watch this short video to see a day-in-the-life on an XPO dock . Minimum qualifications: Be at least 18 years of age Able to do basic math calculations, with and without a calculator Availability to work a variety of shifts, including days, evenings, overnights, weekends, and holidays Preferred qualifications: Dock or warehouse experience in the transportation industry Forklift experience in a freight or less-than-truckload (LTL) environment Experience loading and unloading trailers Strong attention to detail and desire to succeed About the Forklift Operator job Pay, benefits and more: Expected pay range: $ 22.85 to $ 28.10 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set Full health insurance benefits are available on day one Life and disability insurance Earn up to 13 days of PTO over your first year 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Efficiently sort, handle, load and unload palletized and non-palletized freight Use appropriate motorized and manual equipment, including pallet jack and forklift Secure freight inside trailers using appropriate tools and supplies Work in a safe, efficient manner, adhering to company safety policies Use mobile handheld devices to scan and track shipments Work on a dock
---
TITLE: Commercial Rear Load Driver
EMPLOYER: Republic Services
LOCATION: Carnegie, PA, USA (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-10
K401_MATCH: yes (not source-backed)
APPLY_URL: https://republic.wd5.myworkdayjobs.com/republic/job/Carnegie-PA-USA/Commercial-Rear-Load-Driver_R-177143
EXCERPT: Commercial Rear Load Driver Carnegie, PA, USA posted: Posted 2 Days Ago
---
TITLE: Motor Vehicle Operator
EMPLOYER: Department of Health and Human Services
LOCATION: Crownpoint, New Mexico (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-28
HIRE_STATES: NM
APPLY_URL: https://www.usajobs.gov:443/job/870944500
EXCERPT: Motor Vehicle Operator Crownpoint, New Mexico Summary The position is located within the Indian Health Service (IHS) in Crownpoint, New Mexico. The purpose of this position is to perform Motor Vehicle Operator duties by operating and performing operator maintenance on motor vehicles to provide safe and efficient transportation of passengers, supplies, materials, and equipment over public roads and within government installations. A REAL ID will be required beginning May 7, 2025, in accordance with 6 C.F.R. 37.5 (2021). Duties Operates and performs operator maintenance on one or more motor vehicles, including platform trucks, van trucks, stake trucks, cargo vans, passenger shuttle vans, ambulances or patient transport vehicles, and similar vehicles, which typically have an approximate gross vehicle weight of more than 4,500 kilograms (10,000 pounds) and up to 11,700 kilograms (26,000 pounds). Drives assigned vehicles to transport passengers, supplies, materials, equipment, or tools, or to tow equipment to various locations. Loads and unloads cargo and equipment and determines the order in which materials are placed to ensure proper load balance and stability. Performs routine cleaning of patient transport vehicles and passenger vans, including interior and exterior cleaning, to maintain cleanliness and readiness for use. Assists with stocking vehicles with required supplies and equipment in accordance with established checklists and procedures. Reports vehicle defects, safety concerns, or supply shortages to the supervisor and completes routine forms or logs as required. Requirements Selectee may be subject to a probationary period ESEP appointees typically serve a two year trial period U.S. Citizenship is
---
TITLE: Stellantis Certified Technician
EMPLOYER: Carvana
LOCATION: Dallas, TX (unspecified)
SALARY: Not disclosed
POSTED: 2026-03-23
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7744058
EXCERPT: Stellantis Certified Technician Dallas, TX About Carvana At Carvana, we sell cars-but we're not car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own mom. Period. That's why every vehicle goes through Carvana's process, where it's inspected, perfected, and prepared to meet our high standards before it ever reaches you. And now, we're bringing those same values to our new car dealerships-delivering quality, trust, and care you'd be proud to share with Mom. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! About the team and position We're looking for a Automotive Technician to join our growing team. You will be a critical part of a team that handles a wide range of services, from routine maintenance to complex engine and electrical diagnostics. This is an opportunity to grow your skills, work on the latest vehicle technology, and be a part of a company that values expertise and dedication. You'll be responsible for performing a variety of essential services that keep our customers on the road safely. You will work in a fast-paced, high-volume environment, ensuring every service is completed with precision and efficiency. If you are detail-oriented, have
---
TITLE: Effector Power Motor Controls Engineer II
EMPLOYER: Pratt & Whitney
LOCATION: tucson, Arizona, United States of America (onsite)
SALARY: Not disclosed
POSTED: 2026-03-09
APPLY_URL: https://globalhr.wd5.myworkdayjobs.com/REC_RTX_Ext_Gateway/job/US-AZ-TUCSON-M02--1151-E-Hermans-Rd--BLDG-M02/Effector-Power-Motor-Controls-Engineer_01828488/apply
EXCERPT: Effector Power Motor Controls Engineer II tucson, Arizona, United States of America Date Posted. 2026-03-09Country. United States of AmericaLocation. US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02Position Role Type. Onsite. U.S. Citizen, U.S. Person, or Immigration Status Requiremen...
---
TITLE: Electric Biker(02650) 1528 N Arbogast St
EMPLOYER: Domino's
LOCATION: Griffith, IN, United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.smartrecruiters.com/Dominos/744000130944022-electric-biker-02650-1528-n-arbogast-st
EXCERPT: Electric Biker(02650) 1528 N Arbogast St Griffith, IN, United States Company Description: We take pride in our team members and our team members take pride in Domino's! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's, our people come first! Job Description: Wheel your way to some Dough! JOB DESCRIPTION & BENEFITS Want to make extra cash daily and have your cell phone bill paid for?* No License? No Problem! Domino's is now hiring Delivery Bikers! Our e-Bikes are powered with pedal assist, to bring you up to speed quicker! MORE ABOUT THE BIKE! A pedal assist bike is a bicycle with a battery and electric motor. The pedal assist system uses a sensor that determines when you are pedaling, and this engages the electric motor that provides power to push you forward to speeds just under 20mph. Sounds fun, right! Pedal assist bikes are the newest way Domino's is delivering to it's customers, and there are some great benefits: They are a blast to ride! A great was to stay active while at work, but not end the shift worn out! Enjoy the outdoors! Be a part of decreasing emissions! A USB port that allows you to charge your phone while you ride! Ride some of the most technologically advanced bikes around! We provide a helmet and reflective safety vest! CAREER ADVANCEMENT We are growing rapidly, which means Domino's has lots of opportunities to move into our management training program, and
---
TITLE: Account Manager- GM
EMPLOYER: Magna International Inc.
LOCATION: Troy, Michigan, US (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-01
K401_MATCH: yes (not source-backed)
APPLY_URL: https://magna.wd3.myworkdayjobs.com/Magna/job/Troy-Michigan-US/Account-Manager--GM_R00245599
EXCERPT: Account Manager- GM Troy, Michigan, US posted: Posted 11 Days Ago
---
TITLE: Assembler MFG Production (turno 3)
EMPLOYER: Eaton Corporation
LOCATION: SANTIAGO DE LOS CABALLEROSQ, DOM (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://eaton.eightfold.ai/careers/job/687236518687
EXCERPT: Assembler MFG Production (turno 3) SANTIAGO DE LOS CABALLEROSQ, DOM
---
TITLE: Senior System Engineer (Product Definition)
EMPLOYER: Renesas Electronics
LOCATION: Lviv, , Ukraine (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-10
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.smartrecruiters.com/RenesasElectronics/744000058074629-senior-system-engineer-product-definition-
EXCERPT: Senior System Engineer (Product Definition) Lviv, , Ukraine Company Description: Renesas is a global semiconductor company providing hardware and software solutions for a range of cutting-edge technologies including self-driving cars, robots, automated factory equipment, and smart home applications. We are a key supplier to the world's leading manufacturers of the electronics you rely on every day; you may not see our products, but they are all around you. Job Description: As part of our continued growth, we are looking for a Senior System Engineer for Product Definition Team: Required skills and experience: MSc degree in Electronics or other related disciplines Working experience 5+ years in Electronics Strong knowledge of digital and analog electronics Good knowledge in motor control (DCM, BLDC, PMSM, Stepper Motors, FOC technique etc.) Full understanding of analog and digital component parameters Technical writing skills Upper intermediate English level or higher Experience with lab equipment (oscilloscopes, multimeters, signal generators, etc.) Will be a plus: Experience in technical documents/datasheets creation Own developed projects in electronics Product Definer experience in a large semiconductor or electronics company Qualifications: Identify technical and commercial requirements for the new company products Partner with Marketing Team to identify the goals for new product that support market demands Describe product specifications Perform technical research Serve as Product Definer for integrated circuit products Develop and maintain a deep understanding of consumer and industrial applications Work closely with different engineering Teams throughout product development process Additional Information: Friendly and highly professional team 28 calendar days paid vacation Medical
---
TITLE: Extruder Operator
EMPLOYER: Nestle
LOCATION: Country United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
PARENTAL_LEAVE_WEEKS: 4 (not source-backed)
NON_BIRTH_PARENT_LEAVE_WEEKS: 4 (not source-backed)
APPLY_URL: https://jobdetails.nestle.com/job/Miami-Extruder-Operator-OK-74354/1398424133/
EXCERPT: Extruder Operator Country United States Driven by integrity and united by the people-and-pet bond, we find strong purpose in the work we do and an even greater joy in those we get to work alongside. Together, we harness the expertise of our long-standing tradition of excellence to embrace possibility and continuously push to do what's never been done before in pet care. Discover your purpose and fuel your passions when you bring your love of pets to a team that prides itself on the power of togetherness-We are Proudly Connected. Purely Driven. Position Summary Our manufacturing facility in Miami, Oklahoma, stands as a testament to the pet care industry's excellence. Nestled along the Historic Route 66 in northeast Oklahoma, near the borders of Kansas, Missouri, and Arkansas, this facility has been producing a wide array of pet treat products and brands since its inception in 1997. With an unwavering commitment to quality and safety, our factory plays a pivotal role in serving a vast region as we drive the future of pet treat innovation. Join us in Miami, OK-together, we are expanding our capabilities to shape the future of pet care. As an Extruder Operator, you'll be responsible for assuring all formulas are manufactured according to Q&FS specifications and QMP standards in support of the Company's Quality and Food Safety principles. Your ability to acclimate and problem solve quickly will be critically important as unforeseen equipment issues may arise throughout the normal operation day. Safely operate production
---
TITLE: Advanced Manufacturing Engineer - Cab/Sleeper Interiors
EMPLOYER: Paccar
LOCATION: Job Country United States | Job State / Province Texas | Job City Denton (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.paccar.com/job/Denton-Advanced-Manufacturing-Engineer-CabSleeper-Interiors-TX-76205-7864/1398922533/
EXCERPT: Advanced Manufacturing Engineer - Cab/Sleeper Interiors Job Country United States | Job State / Province Texas | Job City Denton Company Information PACCAR is a global technology leader in the design, manufacture, and customer support of high-quality light-, medium- and heavy-duty trucks under the Kenworth, Peterbilt and DAF nameplates. PACCAR also designs and manufactures advanced power trains, provides financial services and information technology, and distributes truck parts related to its principal business. Peterbilt Motors Company On highways, construction sites, city streets, logging roads - everywhere our customers earn their living - Peterbilt's red oval is a familiar symbol of performance, reliability, and pride. Peterbilt has reigned as America's premium quality truck manufacturer since the company's founding in 1939. Our dedication to deliver products and services focused on improving customers' performance, image, profitability, and peace of mind truly makes Peterbilt the Class of the Industry. Requisition Summary Peterbilt Motors Company is looking for an Advanced Manufacturing Engineer to work in Denton, Texas. Provide Manufacturing Engineering support to cab structures and interiors, exterior and interior trim items as well as outerbody components. Studies facilities and production processes, making recommendations to improve production efficiency, enhance process capability, improve product / process quality, and reduce manufacturing costs under general supervision. Job Responsibilities Provide manufacturing support and input to design engineering. Review proposed engineering designs f
---
TITLE: Parts Manager - Dallas
EMPLOYER: Carvana
LOCATION: Dallas, TX (unspecified)
SALARY: Not disclosed
POSTED: 2026-02-18
K401_MATCH: yes (not source-backed)
APPLY_URL: https://www.carvana.com/careers/apply?gh_jid=7629655
EXCERPT: Parts Manager - Dallas Dallas, TX About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our car's are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: This is a supervisory position in an Inspection Center overseeing a team carrying out daily operations within a Carvana Inspection Center.. The Reconditioning Manager oversees all aspects of the vehicle reconditioning process and directs at least five leads and up to 70 front line associates in a lean manufacturing environment. This role will be responsible for maintaining a culture of continuous improvement and high associate engagement while meeting quality, production, and cost objectives. This position is not eligible for visa sponsorship. What you'll be doing: Oversee day-to-day operations within the Inspection Center. Provide mentoring and accountability to direct
---
TITLE: Control System Owner
EMPLOYER: Paccar
LOCATION: Job Country United States | Job State / Province Washington | Job City Kirkland (unspecified)
SALARY: $87K-$136K
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.paccar.com/job/Kirkland-Control-System-Owner-WA-98033/1390151133/
EXCERPT: Control System Owner Job Country United States | Job State / Province Washington | Job City Kirkland PACCAR Electronics is seeking a motivated and experienced Control System Owner . Location : Kirkland, WA or Lewisville, TX About PACCAR PACCAR, Inc. is a Fortune 500 company established in 1905 and is recognized as a global leader in the commercial vehicle, financial, and customer service fields. PACCAR is a global technology leader in the design, manufacture, and customer support of high-quality light-, medium- and heavy-duty trucks under its internationally recognized brands Kenworth, Peterbilt and DAF nameplates. PACCAR designs and manufactures advanced diesel engines and provides customized financial services, information technology and truck parts related to its principal business. About Global PACCAR Electronics The Global PACCAR Electronics organization supports Kenworth, Peterbilt, and DAF by transforming how control systems and vehicle software are developed for commercial vehicle applications. GPE designs next‑generation vehicle controls, display systems, and autonomous technologies that raise the bar for customer productivity and safety. Whether on highways, construction sites, urban centers, or forest roads, PACCAR trucks are recognized for exceptional quality and performance. PACCAR Electronics is central to these product identities-delivering innovations from advanced PTO functionality to intuitive, high‑value digital displays. Join us as we grow and deliver PACCAR's future in connectivity, cybersecurity, electrification, and autonomous systems. Job Summary The
---
TITLE: Delivery Driver(02397) - 216 Mill Street
EMPLOYER: Domino's
LOCATION: Dalton, OH, United States (unspecified)
SALARY: Not disclosed
POSTED: 2026-06-12
K401_MATCH: yes (not source-backed)
APPLY_URL: https://jobs.smartrecruiters.com/Dominos/743999772729056-delivery-driver-02397-216-mill-street
EXCERPT: Delivery Driver(02397) - 216 Mill Street Dalton, OH, United States Company Description: Job Description: Outgoing and enthusiastic person. Job duties include, but not limited to; delivering product to customers by motor vehicle, answering telephones, front counter order transactions, pizza making, product prep, oven tending, general store clean-up and local store marketing. Qualifications: Additional Information:
---
TITLE: Salesperson/Store Driver Store 6693
EMPLOYER: Advance Auto Parts Inc
LOCATION: Towanda, Pennsylvania, United States of America (unspecified)
SALARY: Not disclosed
POSTED: 2026-05-20
K401_MATCH: yes (not source-backed)
APPLY_URL: https://advanceauto.wd5.myworkdayjobs.com/AdvanceExternalCareers/job/292-Ennis-Ln-Towanda-PA-18848/Salesperson-Store-Driver--Store-6693_R-0506633/apply
EXCERPT: Salesperson/Store Driver Store 6693 Towanda, Pennsylvania, United States of America Join our team as a Salesperson/Store Driver, where you will provide excellent customer service, achieve sales goals, and ensure efficient inventory management. If you have a passion for automotive parts and enjoy working in a dynamic environment, we want to hear from you!
---

[PASTE YOUR RESUME OR SKILLS HERE]